Effect of Thermal Treatment on Fracture Properties and Adsorption Properties of Spruce Wood

نویسندگان

  • Koji Murata
  • Yasuhiro Watanabe
  • Takato Nakano
چکیده

The effect of thermal treatment on spruce is examined by analyzing the fracture and hygroscopic properties. Specimens were heated at temperatures within the range 120-200 °C for 1 h. Fracture energy was measured using a single-edge notched bending test and the strain-softening index was estimated by dividing the fracture energy by the maximum load. Adsorption properties were estimated using adsorption isotherms. Fiber saturation points (FSPs) were estimated by extrapolating the moisture adsorption isotherm curve. Langmuir's adsorption coefficient and number of adsorption sites were obtained using Langmuir's theory and the Hailwood-Horrobin theory, respectively. The fracture energy, FSPs, and specimen weights decreased at temperatures higher than 150 °C, but the critical point for the strain-softening index and the number of adsorption sites was shown to be 180 °C. We hypothesize that the fracture energy and FSP depend on the chemical structure of the cell wall, whereas the strain-softening behavior may be influenced by the number of adsorption sites, and in turn the number of hydrogen bonds in hemicellulose.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A novel method for manufacturing of wood flour/PP composites with better fire retardancy and mechanical properties

This study was conducted to investigate the effects of applying methods andamount of ammonium polyphosphate (0, 2 and 4 wt%) on fire retardancy andmechanical properties of wood flour/polypropylene composites. The resultsshowed that addition of fire retardant improved the mechanical properties such astensile and flexural strengths and fire retardancy of composites. But by increasingof fire retar...

متن کامل

Effect of chitosan on the mold resistance of wood and its surface properties

In this study, the effect of soluble chitosan, thyme oil and linseed oil on the mold resistance of wood and its surface properties was investigated. Both low and medium molecular weight chitosan with concentration of 1 and 2% were used. Cypress wood samples with dimensions of 20 × 20 × 70 mm and moisture content of 12% were saturated by the preservatives. The results showed that the maximum abs...

متن کامل

Performance Characterization of Coatings on Treated-wood

Coating performance is greatly influenced by the properties of the wood substrate. This study was focused on evaluating the performance of coatings on both preservative- and thermally-treated wood. A number of commercially formulated semi-transparent stains Alkyd, Alkyd-Acrylic and PU were applied on four different types of preservative treated and heat-treated wood and their performances were ...

متن کامل

Effect of metal nanoparticles on hardness in particleboard

Effects were studied of 200 ppm silver and copper nano-suspensions, with size range from 20 to 80 nm, on the hardness of particleboards produced at an industrial scale at the Iran-Choob Factory, Iran. Metal nano-suspensions were added to the mat at two levels of 100 and 150 milli-liters/kg dry weight wood particles, and the results were compared with those of the control panels. Results showed ...

متن کامل

Effect of metal nanoparticles on hardness in particleboard

Effects were studied of 200 ppm silver and copper nano-suspensions, with size range from 20 to 80 nm, on the hardness of particleboards produced at an industrial scale at the Iran-Choob Factory, Iran. Metal nano-suspensions were added to the mat at two levels of 100 and 150 milli-liters/kg dry weight wood particles, and the results were compared with those of the control panels. Results showed ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2013