K-enriched WO3 nanobundles: high electrical conductivity and photocurrent with controlled polarity.

نویسندگان

  • Zhibin Hu
  • Zhuan Ji
  • Wilson Weicheng Lim
  • Bablu Mukherjee
  • Chenggang Zhou
  • Eng Soon Tok
  • Chorng-Haur Sow
چکیده

Potassium ions are successfully intercalated into WO3 nanobundles with the integrity of the pseudo-orthorhombic structure remaining intact. The nanobundles display a 5-fold increase in the electrical conductivity. It changes from a value of 10(-4) Sm(-1) for pure WO3 to 40 Sm(-1) upon potassium intercalation. The electrical conductivity also increases by ~200 times as temperature increases from 23 to 200 °C whereby analysis shows a thermal activation energy of ~1 eV. Density functional theory calculations show that K ions cause the reduction of the surrounding W atoms and lead to an increase in the electron population in the conduction band. Hence, the conductivity of the K-WO3 nanobundles is greatly enhanced. The calculated band structure also shows a gap of 1 eV that is consistent with the measured thermal activation energy. Upon illumination of focused laser beam, individual and isolated nanobundle displays significant photon induced current (9 nA) without external bias at low laser power (2 mW); the amplitude and polarity of photocurrent could be controlled by location of laser spot.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Diameter-Controlled and Surface-Modified Sb2Se3 Nanowires and Their Photodetector Performance

Due to its direct and narrow band gap, high chemical stability, and high Seebeck coefficient (1800 μVK(-1)), antimony selenide (Sb2Se3) has many potential applications, such as in photovoltaic devices, thermoelectric devices, and solar cells. However, research on the Sb2Se3 materials has been limited by its low electrical conductivity in bulk state. To overcome this challenge, we suggest two ki...

متن کامل

Preparation and characterization of ceramics laser alloyed with WO3 and CuO nanopowders

A surface layer of a ceramic substrate can be modified by introducing a second phase into a melt pool generated locally by a laser beam. CuO, WO3 powders with nanosized particles were used to alloy alumina and a glass ceramic LTCC (Low Temperature Co-fired Ceramic). Depending on the process parameters the nano-particles were melted during the laser process and solidified during cooling in the c...

متن کامل

A Mechanism Underlying the Electrical Polarity Detection of Sensitive Plant, Mimosa Pudica

Natural indicators of the electrical polarity of a direct current (DC) source is limited to semiconductor based diodes and transistors. Recently a novel bio-natural indicator of the polarity of a DC source have been reported. Mimosa Pudica or sensitive plant is found to be a natural detector of a DC source polarity, however the mechanism underlying this phenomenon is not known. This paper aims ...

متن کامل

Hydrogen Sensor Based on Surface Activated WO3 Films by Pd Nanoclusters

Tungsten trioxide has been prepared by using P-PTA as a precursor on alumina substrates by spin coating method. Palladium introduced on WO3 film via electrolysis deposition by using palladium chloride as catalytic precursor. The catalytic precursor was introduced on the series of films with different morphologies. X-ray diffractometry (XRD), Scanning electron microscopy (SEM) and XPS were appli...

متن کامل

ZnWO4/WO3 Composite for Improving Photoelectrochemical Water Oxidation

A rapid screening technique utilizing a modified scanning electrochemical microscope has been used to screen photocatalysts and determine how metal doping affects its photoelectrochemical (PEC) properties. We now extend this rapid screening to the examination of photocatalyst (semiconductor/semiconductor) composites: by examining a variety of ZnWO4/WO3 composites, a 9% Zn/W ratio produced an in...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • ACS applied materials & interfaces

دوره 5 11  شماره 

صفحات  -

تاریخ انتشار 2013