Augmented Reality for Maintenance and Repair (ARMAR)

NOTICE Using Government drawings, specifications, or other data included in this document for any purpose other than Government procurement does not in any way obligate the U.S. Government. The fact that the Government formulated or supplied the drawings, specifications, or other data does not license the holder or any other person or corporation; or convey any rights or permission to manufacture, use, or sell any patented invention that may relate to them. This report was cleared for public release by the 88 th Air Base Wing Public Affairs Office and is available to the general public, including foreign nationals. Copies may be obtained from the Defense Technical Information Center (DTIC) This report is published in the interest of scientific and technical information exchange, and its publication does not constitute the Government's approval or disapproval of its ideas or findings. Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. The purpose of this research, Augmented Reality for Maintenance and Repair (ARMAR), was to research the design and development of experimental augmented reality systems for maintenance job aiding. The goal was to explore and evaluate the feasibility of developing prototype adaptive augmented reality systems that can be used to investigate how real time computer graphics, overlaid on and registered with the actual equipment being maintained, can significantly increase the productivity of maintenance personnel, both during training and in the field.