Mechanical alloying of an immiscible - Fe 2 O 3 - SnO 2 ceramic
نویسندگان
چکیده
منابع مشابه
Structural Transformation of Immiscible Metals Induced by Mechanical Alloying
X-ray absorption fine structure(XAFS) is used to investigate the local structural change of Fe60Cu40 and FegoCu20 with the ball milling time. The XAFS results verify that the solid solution of mechanically alloyed Fe-Cu samples are inhomogeneous. We propose that the bcc to fcc structural transformation of Fe small particles of Fe60Cuq0(160h) is induced by interfacial Cu atoms dissolving in smal...
متن کاملControlled growth of SnO₂@Fe₂O₃ double-sided nanocombs as anodes for lithium-ion batteries.
A novel heterostructure is developed by grafting 1D SnO(2) nanorods onto both sides of pre-grown 2D Fe(2)O(3) nanoflakes, forming a comb-like rather than tree-like branched nanostructure. The SnO(2) nanorod branches are determined to grow along the [001] direction on the (±001) planes of Fe(2)O(3) nanoflakes. The resulting SnO(2)@Fe(2)O(3) nanocombs show stabilized cycling performance and impro...
متن کاملCharacterization of the metastable Cu-Fe nanoparticles prepared by the mechanical alloying route
Although Cu and Fe are immiscible under equilibrium conditions, they can form supersaturated solid solutions by mechanical alloying. In this paper, nano-structured of the metastable Cu-Fe phase containing 10, 15, 20 and 25% wt Fe were synthesized by intensive ball milling for 15h, in order to achieve a solid solution of Fe in Cu. The phase composition, dissolution of the Fe atoms into the Cu ma...
متن کاملA nanoglass alloying immiscible Fe and Cu at the nanoscale.
Synthesized from ultrafine particles with a bottom-up approach, nanoglasses are of particular importance in pursuing unique properties. Here, we design a metallic nanoglass alloy from two components of ∼Cu64Sc36 and ∼Fe90Sc10 nanoglasses. With nanoalloying mutually immiscible Fe and Cu, the properties of the nanoglass alloys can be tuned by varying the proportions of the ∼Fe90Sc10 component. Th...
متن کاملProduction of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying
In this research, the production of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying was investigated and evaluated. Ferrotitanium (containing 70%Ti), titanium and graphite were used as the raw materials. Initial mixtures were milled in different time durations under the pure nitrogen atmosphere with the pressure of 5atm. The results showed that when N2 pressure is 5 at...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017