Comparision of MPC and PID Controls of Sirnak Water Supply Network System

This paper determines the application of a model predictive control (MPC) technique to improve the behavior of the water network supply system, to maintain stable operation of the water flow rate, and reduce the operational cost by manipulating the pump speed. The MPC algorithm is one of the most common automatic control system that has got a wide spread application in process industry. MPC is especially suitable for controlling these types of systems. MATLAB Packaged Program is utilized in the water supply system in Sirnak-Turkey. In this study has been a single input single output linear model of a water supply system considered and Comparised of controls with MPC and PID of water supply system in Sirnak-Turkey. Simulations of MPC Control algorithms for coating process have been made and the results of these simulations were observed. There is a comparison of PID Controller and Generalized Predictive Controller results and there are comments about this comparison in these studies. The simulations and calculations of the algorithms are done in MATLAB Packaged Program Environment. An increasing demand for water due to population growth, industrial development and improvement of economic require management of water transfer and improve operation of water supply systems. The results show that the MPC technique gives improved performance over the PID control technique, moreover, the MPC structure can be modified to handle the constraints applied on the system.