CWDM based HDMI interconnect incorporating passively aligned POF linked optical subassembly modules.

نویسندگان

  • Hak-Soon Lee
  • Sang-Shin Lee
  • Yung-Sung Son
چکیده

A four-channel transmitter OSA (TOSA) and a receiver optical sub-assembly (ROSA) module were presented. They take advantage of a coarse WDM (CWDM) scheme, employing two types of VCSELs at 780 and 850 nm, where no wavelength filters are involved in the TOSA. The ROSA and TOSA were constructed through a fully passive alignment process using components produced by virtue of a cost effective plastic injection molding technique. In order to build a high quality optical HDMI interconnect, four channel optical links between these modules ware established via two graded-index plastic optical fibers (GI-POFs). The HDMI interconnect was thoroughly evaluated in terms of the alignment tolerance, the light beam propagation, and the data transmission capability. For the ROSA, the measured tolerance, as affected by the photodiode alignment, was ~45 μm and over 200 μm for the transverse and longitudinal directions, respectively. For the TOSA, the tolerance, which is mostly dependent upon the VCSEL alignment, was ~20 μm and more than 200 μm for the transverse and longitudinal directions, respectively. The beam profiles for the TOSA and ROSA were monitored to confirm their feasibility from the optical coupling perspective. A digital signal at 2.5 Gb/s was efficiently transmitted through the HDMI interconnect with a bit error ratio of below 10-16. A 1080p HDMI signal from a Blu-ray player was delivered through the interconnect to an LCD monitor and successfully displayed a high quality video.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ribbon plastic optical fiber linked optical transmitter and receiver modules featuring a high alignment tolerance.

Ribbon plastic optical fiber (POF) linked four-channel optical transmitter (Tx) and receiver (Rx) modules have been proposed and realized featuring an excellent alignment tolerance. The two modules share a common configuration involving an optical sub-assembly (OSA) with vertical cavity surface emitting lasers (VCSELs)/photodetectors (PDs), and their driver ICs, which are integrated onto a sing...

متن کامل

Plastic Optical Fiber Coupler with High Index Contrast Waveguide Taper

A simple low-cost Y-branch plastic optical fiber (POF) coupler which can be assembled easily by the end users has been developed. The acrylic-based Y-Branch POF coupler consists of input POF fiber, a middle high index contrast waveguide taper and output POF fibers. The optical device is based on a 1 × 2 Y-branch coupler design with a middle high index contrast waveguide taper. Nonsequential ray...

متن کامل

Fabrication of polymer-SiO2 nanocomposite optical fibers with a new method

At first step polymer optical fibers (POFs) are used in short distance for optical data transmissions. At second step SiO2 nanoparticles were prepared by sonochemical-assisted method. Silica nanoparticles were added to polymer matrix to prepare polymer based nanocomposites. Most of the POF applications are in the medical and electrical devices. There are several methods for fabrication of POFs,...

متن کامل

Photonic module integration based on silicon, ceramic and plastic technologies

This thesis reports the main results in photonic module integration using silicon, multilayer ceramic and plastic technologies. In order to implement high-performance photonic modules the accurate alignment between critical devices and components is very essential. Costefficient photonic modules in volume production can be achieved, when the alignment of devices and components is implemented pa...

متن کامل

Design, implementation, and characterization of a kinematically aligned, cascaded spot- array generator for a modulator-based free-space optical interconnect.

The design and the implementation of a modular spot-array generator for a modulator-based free-space optical interconnect is presented. Two cascaded diffractive optical elements produce 4 x 8 clusters on a 1600 microm x 800 microm pitch, where each cluster is a 4 x 4 array of (1/e(2)) 13.1-microm-radius spots on a 90-microm pitch. The spot-array generator is kinematically aligned to the interco...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics express

دوره 19 16  شماره 

صفحات  -

تاریخ انتشار 2011