CWDM based HDMI interconnect incorporating passively aligned POF linked optical subassembly modules.

A four-channel transmitter OSA (TOSA) and a receiver optical sub-assembly (ROSA) module were presented. They take advantage of a coarse WDM (CWDM) scheme, employing two types of VCSELs at 780 and 850 nm, where no wavelength filters are involved in the TOSA. The ROSA and TOSA were constructed through a fully passive alignment process using components produced by virtue of a cost effective plastic injection molding technique. In order to build a high quality optical HDMI interconnect, four channel optical links between these modules ware established via two graded-index plastic optical fibers (GI-POFs). The HDMI interconnect was thoroughly evaluated in terms of the alignment tolerance, the light beam propagation, and the data transmission capability. For the ROSA, the measured tolerance, as affected by the photodiode alignment, was ~45 μm and over 200 μm for the transverse and longitudinal directions, respectively. For the TOSA, the tolerance, which is mostly dependent upon the VCSEL alignment, was ~20 μm and more than 200 μm for the transverse and longitudinal directions, respectively. The beam profiles for the TOSA and ROSA were monitored to confirm their feasibility from the optical coupling perspective. A digital signal at 2.5 Gb/s was efficiently transmitted through the HDMI interconnect with a bit error ratio of below 10-16. A 1080p HDMI signal from a Blu-ray player was delivered through the interconnect to an LCD monitor and successfully displayed a high quality video.