Representing the Model of Impedance Controlled Robot Interaction with Feedback Delay in Polytopic LPV Form: TP Model Transformation based Approach
نویسندگان
چکیده
The aim of this paper is to transform the model of the impedance controlled robot interaction with feedback delay to a Tensor Product (TP) type polytopic LPV model whereupon Linear Matrix Inequality (LMI) based control design can be immediately executed. The paper proves that the impedance model can be exactly represented by a finite element TP type polytopic model under certain constrains. The paper also determines various further TP models with different advantages for control design. First, it derives the exact Higher Order Singular Value Decomposition (HOSVD) based canonical form, then it performs complexity trade-off to yield a model with less number of components but rather effective for LMI design. Then the paper presents various different types of convex TP model representations based on the non-exact model in order to investigate how convex hull manipulation can be performed on the model. Finally the presented models are analyzed to validate the accuracy of the transformation and the resulting TP type polytopic LPV models. The paper concludes that these prepared models are ready for convex hull manipulation and LMI based control design.
منابع مشابه
TP model transformation based control design for force reflecting tele-grasping under time delay
The improvement of direct human-robot physical interaction has recently become one of the strongest motivation factors in robotics research. Impedance/admittance control methods are key technologies in several directions of advanced robotics such as dexterous manipulation, haptics and telemanipulation. In this paper, we propose a control scheme and a design technique for stabilising shared impe...
متن کاملTP Tool - a MATLAB Toolbox for TP Model Transformation
The Tensor Product model transformation is a numerical method that is capable of uniformly transforming LPV (linear parameter-varying) dynamic models into polytopic forms, both in a theoretical and algorithmic context. Using the TP model transformation, different optimization and convexity constraints can be considered, and transformations can be executed without any analytical interactions, wi...
متن کاملAn LPV Approach to Sensor Fault Diagnosis of Robotic Arm
One of the major challenges in robotic arms is to diagnosis sensor fault. To address this challenge, this paper presents an LPV approach. Initially, the dynamics of a two-link manipulator is modelled with a polytopic linear parameter varying structure and then by using a descriptor system approach and a robust design of a suitable unknown input observer by means of pole placement method along w...
متن کاملVapor Compression Cycle Control for Automotive Air Conditioning Systems with a Linear Parameter Varying Approach
This paper investigates an output tracking problem for the vapor compression cycle in automotive Air Conditioning (A/C) systems using Linear Parameter Varying (LPV) techniques. Stemming from a recently developed first-principle A/C model, Jacobian linearization is first exploited to develop an LPV-based model that is nonlinearly dependent on time-varying system parameters such as evaporator pre...
متن کاملDetermination of Different Polytopic Models of the Prototypical Aeroelastic Wing Section by TP Model Transformation
The Tensor Product (TP) model transformation is a recently proposed technique for transforming given Linear Parameter Varying (LPV) models into polytopic model form, namely, to parameter varying convex combination of Linear Time Invariant (LTI) models. The main advantage of the TP model transformation is that the Linear Matrix Inequality (LMI) based control design frameworks can immediately be ...
متن کامل