Optical-to-RF Frequency Synthesis: Application Priorities for Ultra-low Phase Noise
نویسندگان
چکیده
We describe operational challenges and progress of optical frequency-comb dividers (OFDs) that synthesize RF signals from the optical domain. Our priorities include: (1) ultra-low phase-noise, (2) continuous operation, and (3) broadly low Allan deviation.
منابع مشابه
A New Ultra-Wideband Low Noise Amplifier With Continuous Gain Control
This paper presents a new variable gain low noise amplifier (VG-LNA) for ultra-wideband (UWB) applications. The proposed VG-LNA uses a common-source (CS) with a shunt-shunt active feedback as an input stage to realize input matching and partial noise cancelling. An output stage consists of a gain-boosted CS cascode and a gain control circuit that moves the high resonant frequency to higher freq...
متن کاملLow Phase Noise Fiber Optics Links for Space Applications
This paper summarises the results obtained on different systems dedicated to the optical distribution of high spectral purity RF and microwave signals in a satellite payload or towards the elements of an active antenna. First, the interest of the photo-oscillator receiver for these applications in the RF frequency range is pointed out. Then, different emitter configurations are investigated in ...
متن کاملOptical frequency comb technology for ultra-broadband radio-frequency photonics
A R TI CL E Abstract The outstanding phase-noise performance of optical frequency combs has led to a revolution in optical synthesis and metrology, covering a myriad of applications, from molecular spectroscopy to laser ranging and optical communications. However, the ideal characteristics of an optical frequency comb are application dependent. In this review, the different techniques for the g...
متن کاملDesign of an S-band Ultra-low-noise Amplifier with Frequency Band Switching Capability
In this paper, an ultra-low-noise amplifier with frequency band switching capability is designed, simulated and fabricated. The two frequency ranges of this amplifier consist of the 2.4 to 2.5 GHz and 3.1 GHz to 3.15 GHz frequency bands. The designed amplifier has a noise figure of less than 1dB, a minimum gain of 23 dB and a VSWR of less than 2 in the whole frequency band. The design process s...
متن کاملFrequency discriminators for the characterization of narrow-spectrum heterodyne beat signals: application to the measurement of a sub-hertz carrier-envelope-offset beat in an optical frequency comb.
We describe a radio-frequency (RF) discriminator, or frequency-to-voltage converter, based on a voltage-controlled oscillator phase-locked to the signal under test, which has been developed to analyze the frequency noise properties of an RF signal, e.g., a heterodyne optical beat signal between two lasers or between a laser and an optical frequency comb. We present a detailed characterization o...
متن کامل