An Image-Based Approach for Modeling the Copper Particle Uniformity in Formulation Design of Copper-Coated Graphite
نویسنده
چکیده
To investigate the uniformity of copper particles in formulation design of copper-coated graphite, a quadrat-based method was presented with the image processing. Firstly, the particles were located by the foreground and background clustering algorithm. Then, an improved uniformity quantification model was established using the size and position of the particles. The findings based on the experimental results of the proposed method are as follows: the method is an effective way to quantify the uniformity by comparing with the human visual achievement; the quadrat number should be low to preserve the high performance of the method; at last, it is reasonable to use the mean uniformity in formulation design.
منابع مشابه
New Coated Graphite Potentiometric Sensor for Selective Determination of Copper (II) Ions
A highly selective copper (II) coated graphite sensor was prepared by 1,13-bis(8-quinolyl)- 1,4,7,10,13-pentaoxatridecane (kryptofix 5) as a supramolecule ionophore into plasticized polyvinyl chloride (PVC) membrane. The best response characteristic was observed using the membrane composition of PVC = 30.0 mg, dioctyl sebacate (DOS) = 63.5 mg, palmitic acid (PA) = 3.0 mg and kryptofix 5 = 3.5 m...
متن کاملNovel Method for the Preparation of Copper Phthalocyanin Blue Nanoparticles in an Electrochemical Cell Irradiated by Microwave (RESEARCH NOTE)
Combined electrochemical and hydrothermal assisted by microwave was used for the preparation of copper phthalocyanin blue (Cu Pc) nanoparticles with sizes ranging from 5 to 35 nm. Phthalic anhydride, urea and ammonium molybdate catalyst were dissolved in aqueous solution of 1 M NH4Cl containing a small amount of lauric acid as capping agent to suppress the flocculation of pigment. Electrodes we...
متن کاملIntegrating Fuzzy Inference System, Image Processing and Quality Control to Detect Defects and Classify Quality Level of Copper Rods
Human-based quality control reduces the accuracy of this process. Also, the speed of decision making in some industries is very important. For removing these limitations in human-based quality control, in this paper, the design of an expert system for automatic and intelligent quality control is investigated. In fact, using an intelligent system, the accuracy in quality control is increased. It...
متن کاملModeling of Texture and Color Froth Characteristics for Evaluation of Flotation Performance in Sarcheshmeh Copper Pilot Plant, Using Image Analysis and Neural Networks
Texture and color appearance of froth is a discreet qualitative tool for evaluating the performance of flotation process. The structure of a froth developed on the flotation cell has a significant effect on the grade and recovery of copper concentrate. In this work, image analysis and neural networks have been implemented to model and control the performance of such a system. The result reveals...
متن کاملFabrication of new carbon paste electrodes based on gold nano-particles self-assembled to mercapto compounds as suitable ionophores for potentiometric determination of Copper ions
In the present study, we investigate the potentiometric behavior of Cu2+ carbon paste electrodes based on two mercapto compounds 2-Ethylmino-5-Mercapto-1,3,4-Thiadiazole (EAMT) and 2-Acetylamino-5-mercapto-1,3,4-thiadiazole (AAMT) self-assembled on gold nano-paricle (GNP) as ionophore. Then, the results obtained from the modified electrodes are compared. The self-assembled ionophores exhibit a ...
متن کامل