Fatigue crack propagation of PMMA in organic solvents

ثبت نشده
چکیده

In the present note, the effects of two typical organic solvents, ethanol (95~) and carbon tetrachloride (99~) , on the fatigue crack propagation rates in PMMA are discussed. Fracture mechanics which has been applied successfully to fatigue crack propagat ion in bo th metallic and polymeric sheet materials [1-4] in air is adopted in the present environmental fatigue analyses. The generalized fatigue crack growth law may be written as

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fatigue and corrosion fatigue properties of Ti-6Al-4V implant grade titanium alloy in Ringer solution

Nowadays modification of metallic biomaterials which are used as implants for bone and hard tissues replacement is considered as an important subject. In the current study, corrosion fatigue properties of Ti-6Al-4V alloy investigated via Rotating-Bending standard test method and then, the results compared with the fatigue properties of the specimens tested in the same conditions. Scanning elect...

متن کامل

Probability Approach for Prediction of Pitting Corrosion Fatigue Life of Custom 450 Steel

In this study, the pitting type of corrosion growth characteristics, fatigue crack initiation and propagation behavior; axial fatigue tests were carried out on precipitation hardened martensitic Custom 450 steel in the air and 3.5wt% NaCl solution. Using the ratio of the depth to the half-width of the pits; (a/c)= 1.5±0.2 the corrosion pit depth growth law was obtained as a function of stress a...

متن کامل

Fatigue and biocompatibility properties of a poly(methyl methacrylate) bone cement with multi-walled carbon nanotubes.

Composites of multi-walled carbon nanotubes (MWCNT) of varied functionality (unfunctionalised and carboxyl and amine functionalised) with polymethyl methacrylate (PMMA) were prepared for use as a bone cement. The MWCNT loadings ranged from 0.1 to 1.0 wt.%. The fatigue properties of these MWCNT-PMMA bone cements were characterised at MWCNT loading levels of 0.1 and 0.25 wt.% with the type and wt...

متن کامل

A Finite Element Study of Crack Behavior for Carbon Na-notube Reinforced Bone Cement

Polymethylmethacrylate (PMMA) bone cement is a polymeric material that is widely used as a structural orthopedic material. However, it is not an ideal material for bone grafting due to its fragility. Carbon nanotubes (CNTs) have been introduced in order to reinforce PMMA resulting in a composite material which exhibits improved tensile properties, increased fatigue resistance and fracture tough...

متن کامل

Backscattered Electron Imaging to Enhance Microstructural Contrast in Poly(Methyl Methacrylate) Bone Cement Fracture Analysis

Poly(methyl methacrylate) (PMMA) bone cement is used as a grout to secure joint replacement prostheses into bone. It has a distinct microstructure made up of: prepolymerized beads, an interbead matrix polymer, a radiopacifier {barium sulphate (BaS04) or zirconium dioxide (Zr02)}, and pores or voids; the radiopacifier is fmmd only in the interbead matrix of the cured bone cement. The mechanism o...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004