Role of internal gases and creep of Ag in controlling the critical current density of Ag-sheathed Bi2Sr2CaCu2Ox wires

High engineering critical current density JE of > 500A/mm 2 at 20T and 4.2K can be regularly achieved in Ag-sheathed multifilamentary Bi2Sr2CaCu2Ox (Bi-2212) round wire when the sample length is several centimeters. However, JE(20T) in Bi-2212 wires of several meters length, as well as longer pieces wound in coils, rarely exceeds 200A/mm. Moreover, long-length wires often exhibit signs of Bi-2212 leakage after melt processing that are rarely found in short, open-end samples. We studied the length dependence of JE of state-of-the-art powder-in-tube (PIT) Bi-2212 wires and gases released by them during melt processing using mass spectroscopy, confirming that JE degradation with length is due to wire swelling produced by high internal gas pressures at elevated temperatures [A. Malagoli et al. Supercond. Sci. Technol. 24, 075016 (2011) and A. Malagoli et al. Supercond. Sci. Technol. 26, 055018 (2013)]. We further modeled the gas transport in Bi-2212 wires and examined the wire expansion at critical stages of the melt processing of asdrawn PIT wires and the wires that received a degassing treatment or a cold-densification treatment before melt processing. These investigations showed that internal gas pressure in long-length wires drives creep of the Ag sheath during the heat treatment, causing wire to expand, lowering the density of Bi-2212 filaments, and therefore degrading the wire JE; the creep rupture of silver sheath naturally leads to the leakage of Bi-2212 liquid. Our work shows that proper control of such creep is the key to preventing Bi-2212 leakage and achieving high JE in long-length Bi-2212 conductors and coils.VC 2013 AIP Publishing LLC. [http://dx.doi.org/10.1063/1.4807795]