Non-parametric models in the monitoring of engine performance and condition Part 1: modelling of non-linear engine processes
نویسنده
چکیده
This paper proposes the use of radial basis function (RBF) networks in the modelling of non-linear engine processes. A pertinent application of such a model is the reconstruction of cylinder pressure based upon the instantaneous angular velocity of the engine crankshaft. Distinction is made between parametric and non-parametric models and applications to which each is suited. The structure of an RBF model is presented and the use of this model in combustion pressure reconstruction is discussed. The paper concludes with a treatment of the practicalities associated with the implementation of an RBF model to typify a non-linear engine process.
منابع مشابه
Development of an in-cylinder processes model of a CVVT gasoline engine using artificial neural network
Today, employing model based design approach in powertrain development is being paid more attention. Precise, meanwhile fast to run models are required for applying model based techniques in powertrain control design and engine calibration. In this paper, an in-cylinder process model of a CVVT gasoline engine is developed to be employed in extended mean valve control oriented model and also mod...
متن کاملOptimization of GRI-mech 3.0 Mechanism using HCCI Combustion Models and Genetic Algorithm
This paper presents a modeling study of a CNG Homogenous Charge Compression Ignition (HCCI) engine using single-zone and multi-zone combustion models. Authors' developed code could be able to predict engine combustion and performance parameters in closed part of the engine cycle. As detailed chemical kinetics is necessary to investigate combustion process in HCCI engines, therefore, GRI-m...
متن کاملInternal combustion engines in cylinder flow simulation improvement using nonlinear k-ε turbulence models
The purpose of this paper is to studying nonlinear k-ε turbulence models and its advantages in internal combustion engines, since the standard k-ε model is incapable of representing the anisotropy of turbulence intensities and fails to express the Reynolds stresses adequately in rotating flows. Therefore, this model is not only incapable of expressing the anisotropy of turbulence in an engine c...
متن کاملOil Quality Monitoring in Gasoline Spark Ignition Engine Using Oil Dielectric Measurement
Oil analysis is one of the main methods for monitoring the status of internal combustion engines and oils to ensure the lubricant's protective performance and engine health. This paper investigate oil condition monitoring in gasoline engine using oil dielectric coefficient measurement. At first capacitive sensor pectinate type is designed and manufactured that engine oil can pass through the se...
متن کاملControlling the Power Output and Combustion Phasing in an HCCI Engine
In development of Homogeneous Charge Compression Ignition (HCCI) engines, simultaneous control of combustion phasing and power output has been a major challenge. In this study, a new strategy is developed to control the engine power output and combustion phasing at any desired operating condition. A single zone thermodynamic model coupled to a full kinetic mechanism of Primary Reference Fuels (...
متن کامل