Non Uniform Projections of Surfaces in P3 Alice Cuzzucoli - Riccardo Moschetti - Maiko Serizawa

ثبت نشده
چکیده

In this paper we study the monodromy groups of projections of smooth irreducible surfaces in P3 from points. Our particular interest lies in finding whether the monodromy group of a projection πL of a surface from a point L is the whole symmetric group or not. In the former case, we call L uniform, and in the latter case, not uniform. The very same terminology is also used for the whole projection, calling πL uniform if and only if the monodromy group M(πL) is the whole symmetric group. Much work has been done in the literature for the case of curves to determine which groups can arise as the monodromy group of some projection. The papers [GN95], [GM98] and [GS07] show that if C is a general curve of genus greater than 3, then the monodromy group of a projection C→P1 is either the whole symmetric group or the alternating group. A general curve of degree d and genus g admits a covering with symmetric monodromy group

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Attenuation Correction in SPECT during Image Reconstruction using an Inverse Monte Carlo Method: A Simulation Study

Introduction: The main goal of SPECT imaging is to determine activity distribution inside the organs of the body. However, due to photon attenuation, it is almost impossible to do a quantitative study. In this paper, we suggest a mathematical relationship between activity distribution and its corresponding projections using a transfer matrix. Monte Carlo simulation was used to find a precise tr...

متن کامل

An Analytical Shear Factor for FGM Circular Plates with Non-uniform Elastic Foundations and Normal and Shear Tractions

The available shear correction factors have mainly been developed for homogeneous isotropic plates and/or assuming that no shear tractions are imposed on the top and bottom surfaces of the plate. In the present research, a more general case of a circular functionally graded plate subjected to non-uniform normal and shear tractions at the top and bottom surfaces is considered. These non-uniform ...

متن کامل

Stability Analysis of Laminated Cylindrical Shells under Combined Axial Compression and Non-Uniform External Pressure

This study investigates geometrical non-linear analysis of composite circular cylindrical shells under external pressure over part of their surfaces and also shells subjected to combined axial compression and triangular external pressure. Donnell non-linear shell theory along with first order shear deformation theory (FOSD) are adopted in the analysis. In the case of combined axial compression ...

متن کامل

Thermo-Elastic Analysis of Non-Uniform Functionally Graded Circular Plate Resting on a Gradient Elastic Foundation

Present paper is devoted to stress and deformation analyses of heated variable thickness functionally graded (FG) circular plate with clamped supported, embedded on a gradient elastic foundation and subjected to non-uniform transverse load. The plate is coupled by an elastic medium which is simulated as a Winkler- Pasternak foundation with gradient coefficients in the radial and circumferential...

متن کامل

Some Conditions for Characterizing Minimum Face in Non-Radial DEA Models with Undesirable Outputs

The problem of utilizing undesirable (bad) outputs in DEA models often need replacing the assumption of free disposability of outputs by weak disposability of outputs. The Kuosmanen technology is the only correct representation of the fully convex technology exhibiting weak disposability of bad and good outputs. Also, there are some specific features of non-radial data envelopment analysis (DEA...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017