Preparation and characterization of SiO2-pillared H2Ti4O9 and its photocatalytic activity for methylene blue degradation.

نویسندگان

  • Fang Jiang
  • Zheng Zheng
  • Zhaoyi Xu
  • Shourong Zheng
چکیده

SiO(2) pillared layered titanate (SiO(2)-H(2)Ti(4)O(9)) was prepared via intercalating organosilanes into the interlayers of the layered K(2)Ti(4)O(9) followed by calcination at 500 degrees C. The resulting materials were characterized using XRD, N(2) adsorption-desorption isotherms, UV-vis spectra, IR spectroscopy and Raman spectroscopy. The photocatalytic activity of SiO(2)-H(2)Ti(4)O(9) was evaluated by photocatalytic degradation of aqueous methylene blue dye (MB). XRD and specific surface area results showed that SiO(2)-H(2)Ti(4)O(9) had an interlayer distance of 1.45 nm and a specific surface area of 148 m(2)g(-1). UV-vis absorption spectrum of SiO(2)-H(2)Ti(4)O(9) showed a red shift, indicative of a narrower band gap compared to K(2)Ti(4)O(9). In addition, SiO(2)-H(2)Ti(4)O(9) showed higher MB adsorption capacity compared to H(2)Ti(4)O(9) and K(2)Ti(4)O(9). MB photodegradation over H(2)Ti(4)O(9), K(2)Ti(4)O(9) and SiO(2)-K(2)Ti(4)O(9) followed zero-order kinetics under our experimental conditions, and the photocatalytic activity of SiO(2)-H(2)Ti(4)O(9) was found to be three times higher than that of K(2)Ti(4)O(9), which could be attributed to the increase of interlayer space and specific surface area of SiO(2)-pillared layered titanate.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preparation, Characterization, and Application of Nanospherical α-Fe2O3 Supported on Silica for Photocatalytic Degradation of Methylene Blue

In the research, spherical α-Fe2O3 NanoParticles (NPs) were synthesized through Forced Hydrolysis and Reflux Condensation (FHRC) process and were supported on the surface of silica sand by Solid-State Dispersion (SSD) method. Characterization of silica and α-Fe2O3/SiO2 catalyst was done using Fourier-Transform InfraRed (FT-IR) spectrosc...

متن کامل

Synthesis and Structural Characterization of Bi2O3 Loaded on the MCM-41 and Study of Its Photocatalytic Performance in Degradation of Methylene Blue

In this work, we report synthesis and characterization of Bi2O3 nanoparticles loaded on mesoporous MCM-41 nanoparticles by a simple solid-state dispersion (SSD) method. Monoclinic bismuth oxide nanoparticles were prepared by polyacrylamide gel method and used as loading materials on the prepared mesoporous MCM-41 as a supporting material. Fourier transform infrared spectroscopy (FT-IR), X-ray p...

متن کامل

Synthesis and Structural Characterization of Bi2O3 Loaded on the MCM-41 and Study of Its Photocatalytic Performance in Degradation of Methylene Blue

In this work, we report synthesis and characterization of Bi2O3 nanoparticles loaded on mesoporous MCM-41 nanoparticles by a simple solid-state dispersion (SSD) method. Monoclinic bismuth oxide nanoparticles were prepared by polyacrylamide gel method and used as loading materials on the prepared mesoporous MCM-41 as a supporting material. Fourier transform infrared spectroscopy (FT-IR), X-ray p...

متن کامل

Photocatalytic degradation of methylene blue from aqueous solution using Fe3O4@SiO2@CeO2 core-shell magnetic nanostructure as an effective catalyst

In the present study, the core-shell magnetic nanostructure of Fe3O4@SiO2@CeO2 was synthesized to investigate its use as an effective photocatalyst for methylene blue removal. The prepared samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and a vibrating sample magnetometer (VSM). The photocatalytic activity for the Fe3O4@SiO2@CeO2 core-shell magneti...

متن کامل

Hydrothermally synthesized nanocrystalline Nb2O5 and its visible-light photocatalytic activity for the degradation of congo red and methylene blue

Nb2O5 nanoparticles were synthesized by the hydrothermal method. Structural, morphological and elemental analysis of synthesized Nb2O5 nanoparticles was carried out using X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy, respectively. The average crystal size calculations were performed on the basis ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of hazardous materials

دوره 164 2-3  شماره 

صفحات  -

تاریخ انتشار 2009