Torque Control for DC Servo Motor Using Adaptive Load Torque Compensation
نویسندگان
چکیده
A torque control system is an important process in industries. The value of torque which is generated by DC servomotor depends upon a motor current. Since the torque control system uses the estimated current from an observer, it will receive an effect from torque disturbance (load torque) during an operation. The incorrect estimated current from the observer affects a current feedback signal. This paper presents a technique for torque control of DC servomotor by using adaptive load torque compensation. The load torque can be compensated to the observer, the result show that the estimated current error from the observer is reduced. Therefore, this method can be applied to improve an efficiency of the torque control system and estimate the load torque of DC servomotor. Key-Words: Adaptive compensation, Observer, and Torque control system
منابع مشابه
Torque-speed Adaptive Observer and Inertia Identification without Current Transducers for Control of Electric Drives
This paper develops a high dynamic and robust speed-torque control system for servo drives based on adaptive observer and self-tuning techniques with on-line inertia identification. Only the rotor position is measured even for a low precision shaft encoder. The instantaneous speed and the disturbance torque are accurately estimated by an extended Luenberger observer inertia adaptive. A current ...
متن کاملDsp Based Adaptive Controller for Brushless Dc Motor Used in Robotic Applications
The paper deals with an adaptive speed controller design for a brushless DC motor drive. The controller structure include also a load-torque estimation approach in order to achieve a robust accurate path tracking. The design procedure is based on the fieldoriented control loop so as the controller itself will has two components: a two degree of freedom speed controller and a feed-forward load-t...
متن کاملRobust Speed Servo Control Scheme for Varying Loads
The problem being taken up is, the speed servo control of a PMDC motor. The reference input is continuously changing and also the load torque on the motor shaft is continuously varying. A control law based on the load torque is proposed. The Computed Torque Control scheme is used. The load torque, being of unknown kind, cannot be sensed and hence it has to be estimated. The load torque is estim...
متن کاملRobust Adaptive Fuzzy Sliding Mode Control of Permanent Magnet Stepper Motor with Unknown Parameters and Load Torque
In this paper, robust adaptive fuzzy sliding mode control is designed to control the Permanent Magnet (PM) stepper motor in the presence of model uncertainties and disturbances. In doing so, the nonlinear model is converted to canonical form, then, for designing the controller, the robust sliding mode control is designed to decrease the effects of uncertainties and disturbances. A class of fuzz...
متن کاملCogging Torque Ripple Minimization via Position Based Characterization
Smooth motion is critical to some robotic applications such as haptics or those requiring high precision force control. These systems are often direct-drive, so any torque ripple in the motor output must be minimal. Unfortunately, low inherent torque ripple motors are expensive. Low cost brushless DC motors are becoming more prevalent, especially from the hobby RC community. These motors often ...
متن کامل