An independently reconfigurable dual-mode dual-band substrate integrated waveguide filter
نویسندگان
چکیده
In this paper, a novel perturbation approach for implementing the independently reconfigurable dual-mode dual-band substrate integrated waveguide (SIW) filter is proposed. Dual-frequency manipulation is achieved by adding perturbation via-holes (the first variable) and changing the lengths of the interference slot (the second variable) in each cavity. The independent control of the upper passband only depends on the second variable while the lower passband is independently tuned by combining the two variables. Using such a design method, a two-cavity dual-band SIW filter is designed and experimentally assessed with four via-holes and an interference slot in each cavity. The dual-band filter not only has a frequency ratio (fR) ranging from 1.14 to 1.58 but also can be considered as a single passband one with a tunable range of 40.5% from 1.26 GHz to 2.12 GHz. The scattering parameters |S11| and |S21| are in the range of -10.72 dB to -37.17 dB and -3.67 dB to -7.22 dB in the operating dual bands, respectively. All the simulated and measured results show an acceptable agreement with the predicted data.
منابع مشابه
Dual-Band Evanescent-Mode Substrate Integrated Waveguide Band-pass Filter for WLAN Applications
A new multi-layer substrate integrated waveguide (SIW) structure is developed to design dual-band evanescent-mode band-pass filters (BPFs). Two independent series LC circuits are implemented by incorporating metallic irises in the different layers of the structure. The combination of the metallic irises with capacitive-plates is embedded inside the SIW to independently excite two evane...
متن کاملDual-Band Dual-Mode Substrate Integrated Waveguide Filters with Independently Reconfigurable TE101 Resonant Mode
A novel perturbation approach using additional metalized via-holes for implementation of the dual-band or wide-band dual-mode substrate integrated waveguide (SIW) filters is proposed in this paper. The independent perturbation on the first resonant mode TE101 can be constructed by applying the proposed perturbation approach, whereas the second resonant mode TE102 is not affected. Thus, new kind...
متن کاملDevelopment of an Enhanced Gain Substrate Integrated Waveguide H-plane Horn Antenna Using Thin Substarte
In this paper a dual band and high gain H-plane horn antenna implemented by substrate integrated waveguide (SIW) using a single layer thin substrate is introduced. The proposed antenna consists of five parts of rectangular waveguide with different width arranged in a staircase manner to allow mode combination of fundamental and higher propagating modes of the structure. By adjusting the length ...
متن کاملNovel compact single-band and dual-band bandpass filter based on one-third-mode substrate integrated waveguide
In this paper, a novel structure of One-Third-Mode Substrate Integrated Waveguide Resonator (OTMSIWR) is first proposed, which reduces about 65% size. Based on the OTMSIWR, a single-band bandpass filter (BPF) operats at 4.55GHz is designed. The single-band BPF has a wide and deep upper stopband. Further, a dual-band BPF using high mode technology based on the single-band filter is designed. The...
متن کاملNovel High-Selectivity Dual-Band Substrate Integrated Waveguide Filter with Multi-Transmission Zeros
A novel dual-band filter based on substrate integrated waveguide (SIW) is presented in this paper. The proposed filter is composed of two filters with different center frequencies and bandwidths, where they share input and output ports with source-load coupling using rectangular SIW cavity structure. Multi-transmission zeros have been obtained through electrical coupling between the source and ...
متن کامل