Crashworthy Evaluation of a 1/5-Scale Model Composite Fuselage Concept

نویسندگان

  • Karen E. Jackson
  • Edwin L. Fasanella
چکیده

A 1/5-scale model composite fuselage concept for light aircraft and rotorcraft has been developed to satisfy structural and flight loads requirements and to satisfy design goals for improved crashworthiness. The 1/5-scale model fuselage consists of a relatively rigid upper section which forms the passenger cabin, a stiff structural floor, and an energy absorbing subfloor which is designed to limit impact forces during a crash event. The focus of the present paper is to describe the crashworthy evaluation of the fuselage concept through impact testing and finite element simulation using the nonlinear, explicit transient dynamic code, MSC/DYTRAN. The impact design requirement for the scale model fuselage is to achieve and maintain a 125-g floorlevel acceleration for a 31 ft/s vertical impact onto a rigid surface. This impact requirement corresponds to a 25-g floor-level acceleration for a geometrically-similar full-scale fuselage section. The energy absorption behavior of two different subfloor configurations was determined through quasi-static crushing tests. For the dynamic evaluation, each subfloor configuration was incorporated into a 1/5-scale model fuselage section, which was dropped from a height of 15 ft. to generate a 31 ft/s vertical impact velocity onto a rigid surface. The experimental data demonstrate that the fuselage section with a foam-filled subfloor configuration satisfied the impact design requirement. In addition, the fuselage section maintained excellent energy absorption behavior for a 31 ft/s vertical drop test with a 15°-roll impact attitude. Good correlation was obtained between the experimental data and analytical results for both impact conditions.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Impact Testing and Simulation of a Crashworthy Composite Fuselage Section With Energy-Absorbing Seats and Dummies

A 25-ft/s vertical drop test of a composite fuselage section was conducted with two energy-absorbing seats occupied by anthropomorphic dummies to evaluate the crashworthy features of the fuselage section and to determine its interaction with the seats and dummies. The 5-ft. diameter fuselage section consists of a stiff structural floor and an energy-absorbing subfloor constructed of Rohacel foa...

متن کامل

Interaction between Crosswind and Aviation-Fuel Fire Engulfing a Full-Scale Composite-Type Aircraft: A Numerical Study

This numerical study focuses on the fire phenomenology associated with the presence of a composite-type aircraft immersed, at one particular location and orientation, within a large aviation-fuel fire in a moving fluid medium. An extension of the eddy dissipation concept is incorporated, allowing one to investigate the roles of the wind speed and its direction on the fire growth, heat flux dist...

متن کامل

Design and Analysis of a Composite Fuselage

The present study presents a new methodology developed for an analytical model of a composite fuselage. It also presents finite element analyses of a simplified model and comparisons with more complete models. These comparisons show that there is a very good correlation between both models for the cases studied. Therefore, the applicabilty of the proposed procedure was demonstrated. Based on fi...

متن کامل

AIAA 2005-2349 Blended-Wing-Body (BWB) Fuselage Structural Design for Weight Reduction

Structural analysis and design of efficient pressurized fuselage configurations for the advanced BlendedWing-Body (BWB) flight vehicle is a challenging problem. Unlike a conventional cylindrical pressurized fuselage, stress level in a box type BWB fuselage is an order of magnitude higher, because internal pressure primarily results in bending stress instead of skin-membrane stress. In addition,...

متن کامل

Topology and Parametric Optimization of a Lattice Composite Fuselage Structure

Conventional commercial aircraft fuselages use all-aluminium semi-monocoque structures where the skin carries the external loads, the internal fuselage pressurization and is strengthen using frames and stringers. Environmental and economic issues force aircraft designers to minimize weight and costs to keep air transport competitive and safe. But as metal designs have reached a high degree of p...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1999