Inflection: Assembling Interdisciplinary Material Knowledge using Knitted Fabric Construction

Infl uence of the sample dimension and yarn type on the washing relaxation process of knitted fabrics

While tailoring a garment or a technical textile, relaxation processes of a knitted fabric after production have to be taken into account. Such dimensional changes can occur during a long time of dry relaxation, during wet relaxation, or during washing relaxation, the latter having the strongest infl uence on a fabric. Besides fabric construction and yarn material, the dimensions of a knitted f...

Investigation into the Curling Intensity of Polyester/Cotton Single Jersey Weft Knitted fabric Using Finite Element Method

Curling of knitted fabrics edges is one of the complicated problems of these structures. Therefore, study and measurement of curling in knitted fabrics is important. In this study, it is tried to model the three-dimensional wale wise curl of the fabric using finite element modelling. In this model the tensions in different parts of a knitted loop due to bending and torsional forces in knitting ...

Investigation into the geometrical loop effect on tensile behavior of single bar warp-knitted fabric using finite element method

A Comparison Study of Fabric Objective Measurement (FOM) Using KES-FB and PhabrOmeter System on Warp Knitted Fabrics Handle – Smoothness, Stiffness and Softness

This paper conducts a comparison study using KES-FB and PhabrOmeter to measure 58 selected warp knitted fabric hand properties. Fabric samples were selected and measured by both KES-FB and PhabrOmeter. Results show differences between these two measurement methods. Smoothness and stiffness values obtained by KES-FB were found significant correlated (p value = 0.003 and 0.022) to the PhabrOmeter...

An Experimental Study of Compression Behavior of Warp-knitted Spacer Fabric

This paper presents an experimental study of the compression behavior of a typical warp-knitted spacer fabric which is specially developed as a cushioning material for human body protection. The fabric has a highly heterogeneous and discontinuous structure and exhibits a complicated compression behavior. Different test boundary conditions and sample sizes were first adopted to conduct compressi...