Design a 3 . 5 Antenna for Dual Band Application
نویسندگان
چکیده
The basic shape structures are designed at frequency 2.4 GHz based on radiating structure 5 and 5.2 GHz based on radiating structure 3. The frequency bands that have been chosen are based on the IEEE standards. Then both structures are combined to achieve dual band resonant. The techniques that have been used are by designing the 3.5 shaped by using microstrip, planar and coplanar waveguide structures. Then, the changes on the position of radiating structure 3 have been carried out to investigate the effect for dual band. Keywords— Coplanar waveguide, Dual band, IEEE, Microstrip, Planar, Radiating structure.
منابع مشابه
Design, Simulation and implementation of active dual-band dipole antenna using a series stub
In this paper, a new method for designing an active dual-band dipole antenna is proposed. The operating frequencies of the proposed antenna are 150 and 450 MHz that are usually used in military applications. Using a series stub is the main idea in the proposed dual-band antenna, where it makes an independent resonance frequency higher than the main resonance frequency of a conventional dipole. ...
متن کاملطراحی و ساخت آنتن مایکرواستریپ سه بانده و دوپلاریزه برای BTS
In this paper, a simple dual-band dual-polarized aperture stacked patch antenna with double sided notch is presented. This antenna is suitable for operation in telecommunication base stations. One of the bands covers the GSM band, while the other covers both DCS and UMTS bands. The proposed antenna shows good port decoupling of less than -30dB for dual linear polarization over its operating ban...
متن کاملA Novel Small E–Ring Shaped Monopole Antenna with Dual Band-Notch Function for UWB Wireless Communications
This paper presents an E-ring shaped printed monopole antenna for UWB applications with dual notched bands performance. In order to generate single frequency band notch function, we applied a U-ring shaped monopole antenna, and by inserting a rectangular ring in the centre of it an E-ring shaped radiating patch created and a dual band-notch function can be achieved. The measured bandwidth of th...
متن کاملDual Band Slotted Patch Antenna for On/Off-body Communication
Body Centric Wireless Communication (BCWC) has been topic of much research in recent years. In this manuscript, a novel low-cost microstrip patch antenna is designed for on-/off-body communication with a dual-band operation. The proposed structure exhibits a monopole-like radiation pattern at 2.45 GHz and a broadside radiation at 4.8 GHz, simultaneously. Lateral dimensions of 42 mm × 46 mm and ...
متن کاملMulti Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملطراحی،تحلیل و ساخت آنتن دو بانده برای یک ماهواره LEO کوچک
Separated Turnstile (ST) Antenna has many applications in small Low Earth Orbit (LEO) satellites. Ability of dual-band operation and circular polarization are the main features of this antenna. The purpose of this paper is design and analysis of a Separated Turnstile antenna, which can work in UHF and VHF band simultaneously. The antenna has saddle-shaped radiation pattern in UHF band for data ...
متن کامل