Design of a Two Octave Gysel Power-Divider Using DGS and DMS
نویسندگان
چکیده
Manuscript Received 26-February-2013 and revised 23-June-2013 ISSN 2322-3936 Accepted on 2July-2013 Abstract— This paper proposes a two way L and S band Gysel power divider/combiner that uses line to ground resistors. Step by step methods to obtain a wide isolation and transmission bandwidth are presented. A design that uses five resistors is selected and optimized based on Quasi Newton method. Then the Defected Microstrip Structure (DMS) and Defected Ground Structure (DGS) is used to obtain better transmission and isolation in wider bandwidth. By resizing the structure to meet impedance matching, the two-way L and S band power divider is achieved. Also the optimization of the design is checked using circuit configuration. Finally, the theoretical results are validated by comparison with simulations of structure and experimental results. The simulations are found to be in good agreement with measurement results in the range of 0.7 to 4.3 GHz.
منابع مشابه
Design of a Two Octave Gysel Power-Divider Using DGS and DMS
This paper proposes a two way L and S band Gysel power divider/combiner that uses line to ground resistors. Step by step methods to obtain a wide isolation and transmission bandwidth are presented. A design that uses five resistors is selected and optimized based on Quasi Newton method. Then the Defected Microstrip Structure (DMS) and Defected Ground Structure (DGS) is used to obtain better tra...
متن کاملFour-Way Substrate Integrated Waveguide (SIW) Power Divider/Combiner for High Power Applications
A four-way power divider/power combiner using substrate integrated waveguide (SIW) and microstrip lines is proposed and investigated. The proposed power divider consists of a double-layer substrate with a bottom layer including an SIW T-junction and a top layer including a microstrip network. This microstrip network consists of a modified Gysel power divider which provides a high isolation betw...
متن کاملMiniaturized Gysel Power Dividers Using Lumped-Element Components
This letter presents miniaturized Gysel power dividers using lumped-element components. The characteristic impedances of all the equivalent transmission lines in these dividers are fixed to the same values based on even and odd mode analysis, thus simplifying the design procedure and miniaturizing the Gysel power dividers. The ideal divider designed at a frequency of 590MHz exhibits power split...
متن کاملCompact Wideband Gysel Power Divider with Arbitrary Power Division Based on Patch Type Structure
A novel Gysel power divider based on patch type structure is presented in this paper. The proposed power divider possesses broad bandwidth, small physical occupation and arbitrary power division. More than 30% bandwidth enhancement is achieved based on the −15 dB input return loss criteria, while 55% size reduction is realized compared with conventional Gysel power divider. What’s more, flat di...
متن کاملWide Band Nonuniform Substrate Integrated Waveguide (NSIW) Wilkinson Power Divider
A new wideband Wilkinson Power Divider which use the nonuniform substrate integrated waveguide (NSIW) method is presented in this paper. This structure utilizes NSIWs instead of the uniform quarter wavelength SIWs in conventional Wilkinson power divider. The proposed structure is analyzed by odd and even mode analysis. The proper NSIW section widths can be extracted by using even mode while the...
متن کامل