A lattice Boltzmann algorithm for calculation of the laminar jet diffusion flame

نویسندگان

  • Taehun Lee
  • Ching-Long Lin
  • Lea-Der Chen
چکیده

A new two-distribution lattice Boltzmann equation (LBE) algorithm is presented to solve the laminar diffusion flames within the context of Burke–Schumann flame sheet model. One distribution models the transport of the Schvab–Zeldovich coupling function, or the mixture fraction to combine the energy and species equations. The other distribution models the quasi-incompressible Navier–Stokes equations with the low Mach number approximation. In the quasi-incompressible flows, the thermodynamics quantities depend on the coupling function but not on the hydrodynamic pressure, and the fluid components are assumed to be compressible only in the mixing/reaction region. A systematic and consistent approach to deriving LBEs for the general advection–diffusion equation and the quasi-incompressible Navier–Stokes equations are also presented. The streaming step of the LBEs are discretized by the total variation diminishing (TVD) Lax–Wendroff scheme. Numerical simulations are carried out to reproduce the low frequency flame oscillation (or flame flicker) of buoyant jet diffusion flame. Comparison between the quasi-incompressible model and the incompressible model is presented and the role of non-solenoidal velocity is examined. 2005 Elsevier Inc. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Implementation of D3Q19 Lattice Boltzmann Method with a Curved Wall Boundary Condition for Simulation of Practical Flow Problems

In this paper, implementation of an extended form of a no-slip wall boundary condition is presented for the three-dimensional (3-D) lattice Boltzmann method (LBM) for solving the incompressible fluid flows with complex geometries. The boundary condition is based on the off-lattice scheme with a polynomial interpolation which is used to reconstruct the curved or irregular wall boundary on the ne...

متن کامل

Calculation of Friction Coefficient and Analysis of Fluid Flow in a Stepped Micro-Channel for Wide Range of Knudsen Number Using Lattice Boltzmann (MRT) Method

  Micro scale gas flows has attracted significant research interest in the last two decades. In this research, the fluid flow of gases in the stepped micro-channel at a wide range of Knudsen number has been analyzed with using the Lattice Boltzmann (MRT) method. In the model, a modified second-order slip boundary condition and a Bosanquet-type effective viscosity are used to consider the veloci...

متن کامل

Lattice Boltzmann modeling of two component gas diffusion in solid oxide fuel cell

In recent years, the need for high efficiency and low emission power generation systems has made much attention to the use of fuel cell technology. The solid oxide fuel cells due to their high operating temperature (800 ℃ -1000 ℃) are suitable for power generation systems.Two-component gas flow (H2 and H2O) in the porous media of solid oxide fuel cell’s anode have been modeled via lattice Boltz...

متن کامل

Laminar Smoke Points of Nonbuoyant Jet Diffusion Flames

The laminar smoke point properties of jet diffusion f lames-the luminous flame length, the residence time, and the fuel flow rate, at the onset of soot emission from the flames--have proven to be useful global measures of the soot properties of nonpremixed flames. These measures provide a means to rate several aspects of sooting properties: the relative tendency of various fuels to emit soot fr...

متن کامل

Introduced a Modified Set of Boundary Condition of Lattice Boltzmann Method Based on Bennett extension in Presence of Buoyancy Term Considering Variable Diffusion Coefficients

Various numerical boundary condition methods have been proposed to simulate various aspects of the no-slip wall condition using the Lattice Boltzmann Method. In this paper, a new boundary condition scheme is developed to model the no-slip wall condition in the presence of the body force term near the wall which is based on the Bennett extension. The error related to the new model is smaller tha...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • J. Comput. Physics

دوره 215  شماره 

صفحات  -

تاریخ انتشار 2006