Numerical Simulation in Automotive Design
نویسنده
چکیده
Focussing on those areas of simulation which dominate the large-scale computational requirements within the automotive industry, the initial aim of the paper is to give an insight into typical applications and algorithms being used. Beyond this, the main emphasis will be on the more recent developments related to the take-up of HPC technology in the form of the distributed-memory, message-passing programming paradigm. Examples will be taken from commercial applications codes involved in the ESPRIT porting action EUROPORT.
منابع مشابه
Experimental and Numerical Flow Investigation of Intake Manifold and Multi Criteria Decision Making on 3-cylinder SI Engine using Technique for Order of Preference by Similarity to Ideal Solution (RESEARCH NOTE)
In this paper, technique for order of preference by similarity to ideal solution(TOPSIS) method is used to find the best compromising design of intake manifold for a 3-cylinder engine considering mean value of torque, torque at 3500 rpm, mean value of brake mean specific consumption (BSFC) and BSFC at 3500 rpmas four objective functions. To calculate the objective functions, engine simulation i...
متن کاملIntake Manifold Flow Assessment on a 3-cylinder Natural Aspirated Downsized Engine Using CFD and GT-SUITE
In this paper the intake manifold as the most effective part on engine’s volumetrice efficiency is in vestigated in detail with emphesizing on flow behavior and characterestics. The eight different design have been prepared and imported to CFD software. Five objective functions for investigation of flow have been connsidered and applied in TOPSIS with different weights. Mass flow rate,massfl...
متن کاملModeling and Prediction of FRP Composite Cylinder tubes Crashworthiness Characteristics
In this paper, numerical simulation of FRP composite cylinder tubes progressive crushing processes is conducted using LS-Dyna. Details on the numerical modeling strategy are given and discussed. It is found that triggers introduced in the numerical simulation can effectively model the bevel trigger at the end of the tubular specimens. It is also found that two-layer finite element model based o...
متن کاملThree-dimensional Numerical Simulation of Metal Flow and Solidification in the Multi-cavity Casting Moulds of Automotive Components
The liquid metal flow and the solidification behaviours in a multi-cavity casting mould of two automotive cast parts were simulated in three dimensions. The commercial code, FLOW-3D® was used because it can track the front of the molten metal by a Volume of Fluid (VOF) method and allows complicated parts to be modeled by the Fractional Area/Volume Obstacle Representation (FAVOR) meth...
متن کاملA Full-Cycle 3 Dimensional Numerical Simulation of a Direct Injection Diesel Engine
In the present work, multidimensional modeling of open-cycle process of OM355 engine was developed. Calculations for computational mesh were carried out. The results of the model were validated by experimentally measured in-cylinder pressure and the good agreement between calculations and measurements approved the trustworthy of numerical code. Results included pressure, temperature, emissi...
متن کامل