FEA-DOE Hybrid Modeling of Gravity Die Casting Process: A Review
نویسندگان
چکیده
In the present paper a review for the experimental and finite element analysis techniques is adopted for gravity die casting. Experimental Data taken for Solidification of gravity die Casting is modeled and meshed initially then validation is followed by comparing the experimental and modeled results. This helps to optimize the design criteria for gravity die cast part. To overcome the problem of current gating /riser system and by comparing simulation results of optimized casting model with that of original model we can reduce the porosity and other defects. KeywordsGravity die casting, Design of Experiment, FEM
منابع مشابه
Enhancing Wear Resistance of Squeeze Cast AC2A Aluminum Alloy
The effect of squeeze casting process parameters on wear behavior of AC2A aluminium alloy was primarily investigated in this experimental study. Five process parameters, namely squeeze pressure, pouring temperature, die temperature, die material and compression time, each at four levels were chosen and sixteen experimental runs based on L16 orthogonal array were performed. From analysis of vari...
متن کاملStructural Optimization Using FEA-DOE Hybrid Modeling- A Review
This review presents a thorough survey of academic work on the chassis design by FEA and application of design of experiment method in it. It surveys most literature published in English language. The review aims to provide insight into the truck chassis design and act as a guide for researchers working on both FEA and DOE method for chassis design. The main objective of the design is to obtain...
متن کاملStudy of Process Parameters of Gravity Die Casting Defects
In today’s world a casting production without any defect is almost impossible. After the application of various optimization techniques and process we still are not able to get the defect free castings. So it is critically important to analyze the root cause of casting defect with in the process itself, so that any changes which can hamper the defect intensity can be invoked at the time of manu...
متن کاملA Hybrid Modeling for Continuous Casting Scheduling Problem
This paper deals with a multi-agent-based interval type-2 fuzzy (IT2F) expert systemfor scheduling steel continuous casting. Continuous caster scheduling is a complex and extensiveprocess that needs expert staff. In this study, a distributed multi-agent-based structure is proposed as asolution. The agents used herein can cooperate with each other via various communication protocols.To facilitat...
متن کاملProperties of Centrifugal Casting at Different Rotational Speeds of the
Solidification rate of the casting affects greatly on the microstructure, quality as well as the mechanical properties of the casting. In centrifugal castings solidification rate is faster compared to gravity casting but still solidification depends on various process parameters like, die wall temperature, pouring temperature of the molten metal, wall thickness of the die and also rotational sp...
متن کامل