Design of a Crushing and Agglomeration Process for Manufacturing Bagasse Charcoal

نویسندگان

  • Victoria Y. Fan
  • Amy Smith
  • David Wallace
  • Amy Banzaert
  • Charles Mathis
چکیده

In Haiti, wood and wood charcoal are common fuels for cooking. This practice has contributed to deforestation, leading to erosion and fatal floods. The availability of charcoal made from a different source other than wood, such as agricultural waste, might provide Haitians with an alternative, more sustainable fuel, which in turn may reduce fuel prices. MIT students have developed various methods for producing charcoal out of simple inexpensive devices. In a current manufacturing process, carbonized bagasse is crushed to a powder, then mixed and agglomerated with yucca binder into balls. A novel method may reduce operator exposure and inhalation of charcoal fines by keeping primary manufacturing phases in the oil drum and reducing the operational steps of transferring the material from one location to another. The goal of this thesis was to understand, test, and optimize the parameters of this novel crushing and agglomeration process. The final prototype was found to effectively crushing charcoal and mix charcoal with binder to some extent, while being an inexpensive alternative to reduce overall charcoal exposure. However, the mixing and agglomeration was not sufficiently uniform and further designs should be considered to increase uniformity of mixing of binder and charcoal. Thesis Supervisor: David Wallace Title: Associate Professor of Mechanical Engineering Thesis Supervisor: Amy Smith Title: Edgerton Center Instructor

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Extraction of Hemicellulose and Lignin from Sugarcane Bagasse for Biopolymer Films: Green Process

A hemicellulose is any of several heteropolymers , such as arabinoxylans, present along with cellulose in almost all plant cell walls. Hemicellulose has a random, amorphous structure with little strength. It is easily hydrolyzed by dilute acid or base as well as myriad hemicellulase enzymes. In this study, lignin and hemicellulose was extracted from sugarcane bagasse using the ammonium hydrolys...

متن کامل

The Short and Long Run Causality between Agglomeration and Productivity

This study is to investigate the short- and long-run causal relationship between agglomeration (localization and urbanization) economies and labor productivity in the manufacturing sector of 28 Iranian provinces over an 11-year period, 2001–2011. Fully Modified Ordinary Least Squares (FMOLS) method was used to estimate our long-run panel data model. The empirical findings suggested that localiz...

متن کامل

Closed-form solution for peak crushing force of the S-rails

One of the most important structural components of engine compartment assembly in a car body is the Srail. S-rails has significant role in absorbing energy during crash events and therefore it is designed for efficient behavior in such conditions. Driving the peak crushing force of the S-rails is one of the important objectives in the design process of such structures. Peak crushing force is ex...

متن کامل

Evaluation of the Activated Charcoals and Adsorption Conditions Used in the Treatment of Sugarcane Bagasse Hydrolysate for Xylitol Production

Xylitol has sweetening, anticariogenic and clinical properties that have attracted the attention of the food and pharmaceutical industries. The conversion of sugars from lignocellulosic biomass into xylitol by D-xylose-fermenting yeast represents an alternative to the chemical process for producing this polyol. A good source of D-xylose is sugarcane bagasse, which can be hydrolyzed with dilute ...

متن کامل

Determination of Cost Parameters in Total Design for Manufacturing Parts

Design process is a key process in forming of product’s cost and if we notify to total design we will see all of the effective parameters in design activities. Design process is contented design planning, design inputs, design outputs, design review, design verification, design validation and design changes. This approach will help us to identify the cost parameters for managing, controlling an...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007