Modeling, simulation, and control of a hydraulic Stewart platform

نویسندگان

  • D. Li
  • Septimiu E. Salcudean
چکیده

This paper describes the modeling, simulation, and control of an inverted, ceiling-mounted Stewart platform, designed to be a one-person motion simulator. The dynamic equations of the Stewart platform are derived using the virtual work principle. It is shown by simulations that the leg dynamics can be neglected. A model of the electrohydraulic actuator is derived and then veri ed using experimental data. A linkspace pressure-feedback controller is proposed for high performance with good stability robustness. With the above controller, the small-motion position bandwidth of the platform can reach 9Hz along the vertical axis for a payload of about 140 kg.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling and Wrench Feasible Workspace Analysis of a Cable Suspended Robot for Heavy Loads Handling

Modeling and Wrench feasible workspace analysis of a spatial cable suspended robots is presented. A six-cable spatial cable robot is used the same as Stewart robots. Due to slow motion of the robot we suppose the motion as pseudostatic and kinetostatic modeling is performed. Various workspaces are defined and the results of simulation are presented on the basis of various workspaces and app...

متن کامل

Modeling and Simulation of Variable Frequency Pump Control Fatigue Test Machine

High-speed maglev train is considered an ideal vehicle in the 21st Century, as an important part of the train, the travel mechanism bears and delivers a variety of vertical and horizontal alternating load in operation, it affects the operation safety of the train directly, so key components of the travel mechanism should under fatigue strength test by fatigue test machine.The paper proposed a v...

متن کامل

Nonlinear control of hydraulic robots

| This paper addresses the control problem of hydraulic robot manipulators. The backstepping design methodology is adopted to develop a novel nonlinear position tracking controller. The tracking errors are shown to be exponentially stable under the proposed control law. The controller is further augmentedwith adaptation laws to compensate for parametric uncertainties in the system dynamics. Acc...

متن کامل

The Influence of Dynamics Model Simplifications on an Electrohydraulic Stewart Platform Model-based Control Process

A simulational model of 6 dof Stewart platform type parallel manipulator is presented. The manipulator is driven by electrohydraulic actuators. A novel invariant error dynamics controller is used. The developed control scheme employs the dynamic and hydraulic model of the system. The manipulator model consists of the rigid body equations of motion and the hydraulic dynamics of the main elements...

متن کامل

Nonlinear Modeling and Optimal Output Control of Two Wheeled Balancing Transporter

In this paper an optimal controller is proposed for a self-balancing electrical vehicle called Segway PT. This vehicle has one platform and two wheels on the sides and the rider stands on the platform. A handlebar, as a navigator, is attached to the body of Segway, with which the rider controls the vehicle. Since Segway uses electrical energy produced by batteries, resource consumption manageme...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1997