Improved charge carrier lifetime in planar perovskite solar cells by bromine doping

نویسندگان

  • David Kiermasch
  • Philipp Rieder
  • Kristofer Tvingstedt
  • Andreas Baumann
  • Vladimir Dyakonov
چکیده

The charge carrier lifetime is an important parameter in solar cells as it defines, together with the mobility, the diffusion length of the charge carriers, thus directly determining the optimal active layer thickness of a device. Herein, we report on charge carrier lifetime values in bromine doped planar methylammonium lead iodide (MAPbI3) solar cells determined by transient photovoltage. The corresponding charge carrier density has been derived from charge carrier extraction. We found increased lifetime values in solar cells incorporating bromine compared to pure MAPbI3 by a factor of ~2.75 at an illumination intensity corresponding to 1 sun. In the bromine containing solar cells we additionally observe an anomalously high value of extracted charge, which we deduce to originate from mobile ions.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Low Temperature Solution-Processed Sb:SnO2 Nanocrystals for Efficient Planar Perovskite Solar Cells.

Inorganic metal oxide electron-transport layers (ETLs) have the potential to yield perovskite solar cells with improved stability, but generally need high temperature to form conductive and defect-less forms, which is not compatible with the fabrication of flexible and tandem solar cells. Here, we demonstrate a facile strategy for developing efficient inorganic ETLs by doping SnO2 nanocrystals ...

متن کامل

Fabrication and Characterization of CH3NH3PbI3-x-yBrxCly Perovskite Solar Cells

Fabrication and characterization of CH3NH3PbI3 ́x ́yBrxCly perovskite solar cells using mesoporous TiO2 as electron transporting layer and 2,21,7,71-tetrakis-(N,N-di-4-methoxypheny lamino)-9,91-spirobifluorene as a hole-transporting layer (HTL) were performed. The purpose of the present study is to investigate role of halogen doping using iodine (I), bromine (Br) and chlorine (Cl) compounds as do...

متن کامل

A solution-processed bathocuproine cathode interfacial layer for high-performance bromine-iodine perovskite solar cells.

Perovskite film generally has rough surface morphology due to the voids between the grain domains. Smoothed interface contact between the perovskite layer and the top electrode is critical for planar perovskite solar cells. We reported high efficiency bromine-iodine based perovskite solar cells with a flattening cathode interface by incorporating a solution-processed bathocuproine (sBCP) interf...

متن کامل

Carrier separation and transport in perovskite solar cells studied by nanometre-scale profiling of electrical potential

Organometal-halide perovskite solar cells have greatly improved in just a few years to a power conversion efficiency exceeding 20%. This technology shows unprecedented promise for terawatt-scale deployment of solar energy because of its low-cost, solution-based processing and earth-abundant materials. We have studied charge separation and transport in perovskite solar cells-which are the fundam...

متن کامل

Planar perovskite solar cells using fullerene C70 as electron selective transport layer

Owing amongst other to its high electron mobility, fullerene C70, has been widely used as an electron transporting layer in organic solar cells. In this research, we report the use of C70 thin films as electron transport layers of planar perovskite solar cells (PSCs) using a conventional device structure. The thickness of the C70 layer has been optimized to achieve the best efficiency of 12%. I...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2016