Interplay of oxygen-evolution kinetics and photovoltaic power curves on the construction of artificial leaves.
نویسندگان
چکیده
An artificial leaf can perform direct solar-to-fuels conversion. The construction of an efficient artificial leaf or other photovoltaic (PV)-photoelectrochemical device requires that the power curve of the PV material and load curve of water splitting, composed of the catalyst Tafel behavior and cell resistances, be well-matched near the thermodynamic potential for water splitting. For such a condition, we show here that the current density-voltage characteristic of the catalyst is a key determinant of the solar-to-fuels efficiency (SFE). Oxidic Co and Ni borate (Co-B(i) and Ni-B(i)) thin films electrodeposited from solution yield oxygen-evolving catalysts with Tafel slopes of 52 mV/decade and 30 mV/decade, respectively. The consequence of the disparate Tafel behavior on the SFE is modeled using the idealized behavior of a triple-junction Si PV cell. For PV cells exhibiting similar solar power-conversion efficiencies, those displaying low open circuit voltages are better matched to catalysts with low Tafel slopes and high exchange current densities. In contrast, PV cells possessing high open circuit voltages are largely insensitive to the catalyst's current density-voltage characteristics but sacrifice overall SFE because of less efficient utilization of the solar spectrum. The analysis presented herein highlights the importance of matching the electrochemical load of water-splitting to the onset of maximum current of the PV component, drawing a clear link between the kinetic profile of the water-splitting catalyst and the SFE efficiency of devices such as the artificial leaf.
منابع مشابه
Economic Assessment of Photovoltaic Power Plants Construction with Emphasis on Currency Price Fluctuations
A quarter of Iran’s area is made from deserts with radiation exceeding . Also, the solar radiation of many parts of Iran is above the international average. So, the use of solar energy in the power system has increased in recent years. On the other hand, the success or failure of a project relates to the economic fluctuations of the country. In this paper, the effects of currency price sudden...
متن کاملIncreasing the Efficiency of Photovoltaic Systems by Using Maximum Power Point Tracking (MPPT)
Using Photovoltaic systems is gradually expanded by increasing energy demand. Abundance and availability of this energy, has turned to one of the most important sources of renewable energy. Unfortunately, photovoltaic systems have two big problems: first, those have very low energy conversion efficiency (in act between 12 and 42 percent under certain circumstances). Second, the power produced b...
متن کاملOptimal Reconfiguration of Solar Photovoltaic Arrays Using a Fast Parallelized Particle Swarm Optimization in Confront of Partial Shading
Partial shading reduces the power output of solar modules, generates several peak points in P-V and I-V curves and shortens the expected life cycle of inverters and solar panels. Electrical array reconfiguration of PV arrays that is based on changing the electrical connections with switching devices, can be used as a practical solution to prevent such problems. Valuable studies have been perfor...
متن کاملThe Novel Control Method for Photovoltaic Converter to the National Grid
In this paper, a novel control method for photovoltaic converter connection to the national gridis presented, so in addition to the injection control by solar arrays to the grid, this method cancompensate reactive power and harmonics in the load current. The system will be connected inparallel between the grid and load. The proposed system supplies all load power consumption(including active po...
متن کاملAnalysis of Photovoltaic Module Resistance Characteristics
Abstract: This paper proposes a new analysis method for photovoltaic (PV) modules. The main objectives are to obtain the resistance parameters of PV modules by adjusting I-V equation and voltage equation of diode and to find the relationship between resistance parameters and power. Firstly, values of serial resistance and parallel resistance at maximum power point are concluded. Secondly, the c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Proceedings of the National Academy of Sciences of the United States of America
دوره 109 39 شماره
صفحات -
تاریخ انتشار 2012