Rapid fabrication and characterization of AISI 304 stainless steels modified with Cu additions by additive alloy melting (ADAM)
نویسندگان
چکیده
∗ Corresponding authors. E-mails: [email protected] (M. Cristobal), [email protected] (D. San-Martin), [email protected] (C. Capdevila), [email protected] (J.A. Jiménez), [email protected] (S. Milenkovic). https://doi.org/10.1016/j.jmrt.2017.12.001 2238-7854/© 2017 Brazilian Metallurgical, Materials and Mining Association. Published by Elsevier Editora Ltda. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). Document downloaded from http://www.elsevier.es, day 04/02/2018. This copy is for personal use. Any transmission of this document by any media or format is strictly prohibited.
منابع مشابه
Mechanical Characterization of Friction Welded AISI 304 Steels
There are many industries where austenitic stainless steel needs to be welded specially in power generation industries. Unfortunately the austenitic stainless welding has several fabrication and metallurgical drawbacks when welded by using conventional fusion welding methods, which can often leads to in-service failure. The most pronounced fabrication faults are hot cracks due to inadvertent us...
متن کاملElectroless Deposition of Ni-Cu-P Alloy on 304 Stainless Steel by Using Thiourea and Gelatin as Additives and Investigation of Some Properties of Deposits
In this research a layer of Ni-Cu-P was deposited on 304 stainless steels by using gelatin and thiourea as additives in a sulfate solution. In order to determine the properties of deposited layers, a microhardness tester was used for microhardness measurement, X.R.D. for microstructural analysis, and a scanning electron microscope equipped with E.D.X. for determining morphology and analyzing th...
متن کاملNICKEL RELEASE FROM 304 AND 316 STAINLESS STEELS lN SYNTHETIC SWEAT. COMPARISON WITH NICKEL AND NICKEL-PLA TED MET ALS. CONSEQUENCES ON ALLERGIC CONTACT DERMATITIS
Release of nickel from nickel or nickel-plated metals, is often responsible for allergic contact dermatitis. However, the effect of nickel-bearing stainless steels is not weil known. ln this paper AISI 304, 316 and 430 type stainless steels, as weil as nickel and nickel-plated materials, are investigated. Three tests were carried out: electrochemical tests and leaching experiments in sodium chl...
متن کاملMicrostructure and Mechanical Properties of Cold Rolled AISI 304L and 316L Austenitic Stainless Steels during Reversion Annealing
Microstructural evolutions during annealing of cold rolled AISI 304L and AISI 316L stainless steels were studied. Cold rolled AISI 304L alloy was fully martensitic but cold rolled AISI 316L alloy was partially martensitic due to the higher stability of the austenite phase in the latter. During continuous heating to elevated temperatures, the complete reversion of strain-induced martensite at 75...
متن کاملApplications of soft X-ray absorption spectroscopy to the study of passive and oxide layers on stainless steels: influence of ion implantation
Soft X-ray absorption spectroscopy (XAS) has been used to study the influence of Si ion implantation on the passive layer of AISI 304 stainless steel, as well as on its high-temperature oxidation behaviour. Ion implantation is a usual technique to improve the corrosion and oxidation resistance of steels. To study the effects of ion implantation on the room temperature corrosion behavior of AISI...
متن کامل