Models for Pressure Control of Automated Dry Clutches: Temperature Influence on Frictional and Elastic Behaviour
نویسندگان
چکیده
Automated Manual Transmissions (AMTs) systems are generally constituted by a dry or wet clutch assembly and a multi-speed gearbox, both equipped with electro-mechanical or electro-hydraulic actuators, which are driven by a control unit, the transmission control unit (TCU). In this transmission type the quality of the vehicle propulsion as perceived by the driver is largely dependent on the quality of the control strategies. This paper aims at investigating the influence of the temperature on the engagement performance of an actively closed dry clutch.
منابع مشابه
Cushion Spring Sensitivity to the Temperature Rise in Automotive Dry Clutch and Effects on the Frictional Torque Characteristic
In automotive dry clutch systems the cushion spring plays an important role in terms of gradually torque transmitted during the engagement phase. In fact, it strongly influences the clutch torque transmission from engine to driveline through its non-linear loaddeflection curve. Therefore, to improve the gearshift performance in automated manual transmission is fundamental the knowledge of the c...
متن کاملEffects of Flow Hydraulics, Pipe Structure and Submerged Jet on Leak Behaviour
The aim of this paper is numerical and experimental study of the effects of flow hydraulics, pipe structure (particularly elastic behaviour) and submerged jet on leak behaviour. In this regard, experimental tests were performed on a high-pressure circulation set up. Experiments were performed on an old steel pipe and a High Density Polyethylene (HDPE) pipe discharged to the atmosphere in a wide...
متن کاملClosed Form Solution for Electro-Magneto-Thermo-Elastic Behaviour of Double-Layered Composite Cylinder
Electro-magneto-thermo-elastic response of a thick double-layered cylinder made from a homogeneous interlayer and a functionally graded piezoelectric material (FGPM) outer layer is investigated. Material properties of the FGPM layer vary along radius based on the power law distribution. The vessel is subjected to an internal pressure, an induced electric potential, a uniform magnetic field and ...
متن کاملInfluence of an external magnetic field on the peristaltic flow of a couple stress fluid through a porous medium.
Magnetohydrodynamic(MHD) peristaltic flow of a Couple Stress Fluid through a permeable channel is examined in this investigation. The flow analysis is performed in the presence of an External Magnetic Field. Long wavelength and low Reynolds number approach is implemented. Mathematical expressions of axial velocity, pressure gradient and volume flow rate are obtained. Pressure rise, frictional f...
متن کاملHeat and Mass Transfer Analysis on MHD Peristaltic Prandtl Fluid Model through a Tapered Channel with Thermal Radiation
This paper deals with a theoretical investigation of heat and mass transfer with thermal radiation analysis on hydromagnetic peristaltic Prandtl fluid model with porous medium through an asymmetric tapered vertical channel under the influence of gravity field. Analytical results are found for the velocity, pressure gradient, pressure rise, frictional force, temperature and concentration. The in...
متن کامل