Influence of Operating Conditions on High-cycle Fatigue Properties of High Alloyed Steel X20
نویسندگان
چکیده
In this paper, the effect of service temperature and life on high-cycle fatigue properties of base metal, steel X20 CrMoV 12-1, has been analysed. The effect of service conditions has been analysed by testing the new material and material that was in service for 116000 hours. The investigations have included determination of permanent fatigue strength at room and operating temperature. These investigations and their analysis should provide a practical contribution to assessment of behaviour of high alloy steel X20 under variable loading, thus ensuring safety in operation of the components in thermal power plants.
منابع مشابه
Fatigue Behavior of Heat Treated 30MSV 6 Vanadium Micro alloyed Steel
Fatigue behavior of a vanadium microalloy steel has been studied in this research. Here, microstructure constituents were considered which essentially are dependent on the heat treatment conditions. The results of high cycle fatigue tests revealed that heat treatment procedure and cooling rates have significant effects on fatigue properties. Optimal heat treatment cycle of the microalloyed s...
متن کاملThe Effect of Variable Loading on Integrity of a Welded Joint of High Alloy-steel X20
Z. Burzić, Military Technical Institute, Belgrade, Serbia. Dž. Gačo, F. Islamović, E. Bajramović, Technical faculty, University of Bihac,Bihac, Bosnia and Herzegovina. M. Burzić, University of Belgrade, I.C. Faculty of Mechanical Engineering, Belgrade, Serbia. In present paper, experimental investigations have included the eff ect of exploitation conditions (exploitation time and temperature) o...
متن کاملInvestigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel
Producing parts with high density and improved mechanical properties is one of the most important aims of powder metallurgy process. There are many factors for attaining modified properties in sintered parts but among them controlling type and quantity of alloying elements and manufacturing parameters such as compacting pressure, sintering temperature are the most effective. In this research, t...
متن کاملInfluence of Residual Stress on Fatigue Life of Hot Forged and Shot Blasted Steel Components
Hot forging is a common manufacturing process for the production of large quantities of engineering components. Residual stresses are developed in forged components as a result of various aspects of the manufacturing process, including subsequent cooling, and heat treatment. Residual stresses can significantly affect the deformation and fatigue failure of materials. Hot forged EN15R steel bars ...
متن کاملEffect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma
Nitriding treatments of low alloyed steels can be performed only at relatively low temperatures in order to avoid a decrease of corrosion resistance due to nitride layers formation. These conditions promote the formation of the compound layer and diffusion zone, which shows high hardness and good corrosion resistance. In the present paper, the influence of the gas mixture N2-H2 in plasma nitrid...
متن کامل