Switch-Mode Continuously Variable Transmission: Modeling and Optimization
نویسندگان
چکیده
Hybrid vehicles are an important step toward reducing global petroleum consumption and greenhouse gas emissions. Flywheel energy storage in a hybrid vehicle combines high energy density and high power density, yet requires a highly efficient continuously variable transmission with a wide operating range. This paper presents a novel solution to coupling a high-speed flywheel to the drive train of a vehicle, the switch-mode continuously variable transmission (CVT). The switch-mode CVT, the mechanical analog of a boost converter from power electronics, utilizes a rapidly switching clutch to transmit energy from a flywheel to a spring, which applies a torque to the drive train. By varying the duty ratio of the clutch, the average output torque is controlled. This paper examines the feasibility of this concept by formulating a mathematical model of the switch-mode CVT, which is then placed in state-space form. The state-space formulation is leveraged to analyze the system stability and perform simple optimization of the switch time and damping rate of the spring over the first switching period. The results of this work are that a stable equilibrium does exist when the speed of the output shaft is zero, but the system will not reach and stay at a desired torque if this condition is not met, but requires continuous switching between the two states. An optimal switching time and damping ratio were found for the given parameters, where the lowest error occurred with low values of damping ratio. This work builds a foundation for future work in increasing the complexity of the model and the optimization method. DOI: 10.1115/1.4003373
منابع مشابه
Multi-objective Optimization of Hybrid Electric Vehicle Equipped with Power-split Continuously Variable Transmission
This paper aims to find the efficient state of hybrid electric vehicle (HEV) by simultaneous optimization of the control strategy and the power train. The power transmission employed in this vehicle is a power-split continuously variable transmission (CVT) which uses several fixed ratio mechanisms. After describing this transmission, the rules of electric assist control strategy are introduced....
متن کاملApplication of Multi-objective Optimization for Optimization of Half-toroidal Continuously Variable Transmission
Among different goals defined in vehicle design process, fuel consumption (FC) is one of the most important objectives, which significantly has taken into account lately, both by the customers and vehicle manufacturers. One of the significant parameters which impacts the vehicle FC is the efficiency of vehicle's power train. In this paper, a half-toroidal continuously variable transmission (CVT...
متن کاملModelling and Optimization of Toroidal Continuously Variable Transmission in ECE Driving Cycle
In the present study, the aim is to optimize full and half toroidal continuously variable transmission (CVT) in order to minimize the vehicle fuel consumption (FC) in ECE driving cycle. First, the model of both CVTs’ efficiency is presented. The control strategy of CVTs speed ratio based on minimizing the vehicle FC is introduced, and the algorithm of calculating the vehicle FC is shown. Afterw...
متن کاملLow Fuel Consumption Control Scheme Based on Nonlinear Optimzation for Engine and Continuously Variable Transmission
The environment has recently led to very severe regulations on fuel consumption and exhaust emissions. I propose a scheme to minimize rate of fuel consumption for a direct fuel injection engine used by combination with a continuously variable transmission. Target values for the engine and the transmission which minimizes fuel consumption ensuring driving performance is calculated based on the n...
متن کامل