Stability of Nonaqueous Emulsions

نویسندگان

  • Imhof
  • Pine
چکیده

We examined the stability of emulsions of oil in several nonaqueous polar liquids using commercially available nonionic surfactants. Stable nonaqueous emulsions were only obtained with formamide and dimethylsulfoxide. Hydrogen bonding, and not polarity, appears to be the important factor determining the emulsifying power of a solvent. Ostwald ripening plays a much more important role in the stability of these nonaqueous emulsions than in the corresponding aqueous systems. This destabilizing process can be prevented, however, by addition to the oil phase of a small amount (1%) of an oil that has a very low solubility in the continuous phase. Furthermore, a larger size of the surfactant molecule protects emulsions against droplet coalescence. Thus, emulsions in formamide and dimethylsulfoxide did not show any breakdown when stabilized with a triblock copolymer of polyoxyethylene-polyoxypropylene-polyoxyethylene. Copyright 1997Academic Press

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Salinity, pH, and Temperature on Stability of Gas Condensate in Water Emulsions Using Different Surfactants

Light hydrocarbons in water emulsions are formed in many gas refinery wastewaters, and its stability depends on some parameters such as temperature, pH and salinity. In this study, different surfactants have been used to prepare gas condensates in water emulsion along with four surfactant kinds namely, Span 80, Tween 80, CTAB, SDS and Span 80 and Tween 80 mixture. For this purpose,...

متن کامل

The physical and rheological properties of egg albumin emulsions are influenced by basil seed gum as the stabilizer

In this study, the effect of basil seed gum (BSG) on the stability and rheological properties of egg white albumin (EWA) emulsions was investigated. A constant amount of EWA (0.5% w/v) and different concentrations of BSG (0-0.3% w/v) were used for the manufacture and stabilization of oil-in-water emulsions (30% w/w). The results showed that by increasing BSG concentration, the storage (21 days)...

متن کامل

مروری بر پایداری و روش‌‌های تخمین طول عمر امولسیون‌های انفجاری

Emulsion explosive is a form of water in oil emulsions. They include a mixture of fuel and oxidizer and other components. Emulsions are a new type of industrial explosive materials. Because of the stability, high safety and well explosive performance, are used as a powerful and inexpensive source of energy in agriculture, water conservancy, transportation, mining, building materials and etc. So...

متن کامل

In-situ control of DNAPL density using polyaphrons.

Once spilled into soils, dense nonaqueous phase liquids (DNAPLs) such as chlorinated solvents migrate deep into the subsurface because of their high density. Their downward migration typically continues until capillary forces balance gravitational forces or until essentially impermeable strata are reached. Efforts to mobilize the DNAPL for remediation purposes risks driving the contaminants dee...

متن کامل

Adsorbed triblock copolymers deliver reactive iron nanoparticles to the oil/water interface.

Reactive zero valent iron nanoparticles can degrade toxic nonaqueous phase liquids (NAPL) rapidly in contaminated groundwater to nontoxic products in situ, provided they can be delivered preferentially to the NAPL/water (oil/water) interface. This study demonstrates the ability of novel triblock copolymers to modify the nanoiron surface chemistry in a way that both promotes their colloidal stab...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of colloid and interface science

دوره 192 2  شماره 

صفحات  -

تاریخ انتشار 1997