Chemical Effect on Wellbore Instability of Nahr Umr Shale
نویسندگان
چکیده
Wellbore instability is one of the major problems that hamper the drilling speed in Halfaya Oilfield. Comprehensive analysis of geological and engineering data indicates that Halfaya Oilfield features fractured shale in the Nahr Umr Formation. Complex accidents such as wellbore collapse and sticking emerged frequently in this formation. Tests and theoretical analysis revealed that wellbore instability in the Halfaya Oilfield was influenced by chemical effect of fractured shale and the formation water with high ionic concentration. The influence of three types of drilling fluids on the rock mechanical properties of Nahr Umr Shale is tested, and time-dependent collapse pressure is calculated. Finally, we put forward engineering countermeasures for safety drilling in Halfaya Oilfield and point out that increasing the ionic concentration and improving the sealing capacity of the drilling fluid are the way to keep the wellbore stable.
منابع مشابه
Minimizing Water Invasion into Kazhdumi Shale Using Nanoparticles
Fluid invasion from water-based drilling mud (WBDM) into the shale formations causes swelling, high pressure zone near the wellbore wall, and eventually wellbore instability problems during drilling operations. For the stability of the wellbore, physical plugging of nanoscale pore throats could be considered as a logical approach toward avoiding the fluid invasion into the shale formation. This...
متن کاملWellbore Stability in Shale Formation Using Analytical and Numerical Simulation
Optimization of drilling fluid parameters such as mud weight, salt concentration, and temperature is essential to alleviate instability problems during drilling through shale sections. The selection of suitable mud parameters can benefit from analyses that consider significant instability processes involved in shale-drilling–fluid interactions. This paper describes the development of analytical...
متن کاملWellbore Stability in Oil and Gas Drilling with Chemical-Mechanical Coupling
Wellbore instability in oil and gas drilling is resulted from both mechanical and chemical factors. Hydration is produced in shale formation owing to the influence of the chemical property of drilling fluid. A new experimental method to measure diffusion coefficient of shale hydration is given, and the calculation method of experimental results is introduced. The diffusion coefficient of shale ...
متن کامل2D Numerical Simulation of Improving Wellbore Stability in Shale Using Nanoparticles Based Drilling Fluid
The past decade has seen increased focus on nanoparticle (NP) based drilling fluid to promote wellbore stability in shales. With the plugging of NP into shale pores, the fluid pressure transmission can be retarded and wellbore stability can be improved. For better understanding of the interaction between shale and NP based drilling fluid based on previous pressure transmission tests (PTTs) on A...
متن کاملReal-time Wellbore Stability Analysis: An Observation from Cavings at Shale Shakers*
Drill cuttings are considered representative of the lithology being drilled in a wellbore. However, the fragments that are two to three times larger and/or having odd shapes compared to the regular cuttings are commonly understood as cavings from the wall of the borehole and they are seldom of any help in compilation of a lithology. In fact, cutting description manual recommends ignoring cuttin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
دوره 2013 شماره
صفحات -
تاریخ انتشار 2013