Acetone Detection by Chemical Sensors Based on Tungsten and Titanium Oxide Nanowires
نویسندگان
چکیده
Tungsten and titanium oxide (WO3/Ti) nanowires (NWs) were grown by thermal oxidation of a tungsten and titanium alloy (WTi) metallic layer deposited on 2 × 2 mm2 alumina substrates by DC magnetron sputtering. Thermal oxidation was carried out in a custom evaporator chamber. Several parameters were controlled to achieve the optimal growth conditions. Morphological and structural analysis were performed on samples by a scanning electron microscope (SEM) and RAMAN spectroscopy, respectively. Nanowires, grown directly on the final transducer, were tested towards different gaseous species in a wide range of working temperatures. In this work, results obtained in presence of acetone are proposed.
منابع مشابه
Vapor phase synthesis of tungsten nanowires.
A concept is presented for synthesizing metal nanowires directly from the vapor phase using chemical vapor transport to temperatures higher than the corresponding metal oxide decomposition temperature. Specifically, this concept is demonstrated with the synthesis of tungsten metal nanowires with sizes ranging from 70 to 40 nm by increasing the condensation temperature. The simultaneous condensa...
متن کاملMetal Oxide Nanowire Preparation and Their Integration into Chemical Sensing Devices at the SENSOR Lab in Brescia
Metal oxide 1D nanowires are probably the most promising structures to develop cheap stable and selective chemical sensors. The purpose of this contribution is to review almost two-decades of research activity at the Sensor Lab Brescia on their preparation during by vapor solid (n-type In₂O₃, ZnO), vapor liquid solid (n-type SnO2 and p-type NiO) and thermal evaporation and oxidation (n-type ZnO...
متن کاملNanostructured Tungsten Oxide Composite for High-Performance Gas Sensors
We report the results of composite tungsten oxide nanowires-based gas sensors. The morphologic surface, crystallographic structures, and chemical compositions of the obtained nanowires have been investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Raman scattering, respectively. The experimental measurements reveal that each wire consists of crystalline nanopartic...
متن کاملW-doped nanoporous TiO2 for high performances sensing material toward acetone gas
W-doped TiO2 with nanoporous structure was synthesized by a one-step low temperature hydrothermal method using TiOSO4 and (NH4)6H2W12O40•xH2O as titanium and tungsten sources. Structure, morphology, specific surface area and chemical state of samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). W-doped nanoporo...
متن کاملSpecific Fast Response CH4 Gas Sensor Based on Metal Oxide, Tungsten Carbide /SnO2Core-Shell Modified Interdigitated Electrode
In this study, a specific CH4 sensor is fabricated based on interdigitated electrode that modified with core-shell of tungsten carbide/tin oxide (WC/SnO2) nanoparticles by wet chemical method in different percents of carbon and tungsten. The morphology of wet chemical-synthesized WC/SnO2 core-shell was evaluated by different methods such as patterned X-ray d...
متن کامل