Whole device printing for full colour displays with organic light emitting diodes
نویسندگان
چکیده
Whole device printing is presented for realizing full colour displays with red (R), green (G) and blue (B) organic light emitting diodes (OLEDs). In this process, the whole OLED structure is transferred from a patterned mould to a glass substrate. Therefore, a simple step and repeat of the transfer of each of R, G and B OLED for RGB pixels completes the fabrication of the full colour display over a given area. A difference in the work of adhesion at two interfaces enables the transfer. A ‘rigiflex’ mould is used for the printing. It is rigid enough to allow sub-100 nm resolution and yet flexible enough for intimate contact with the glass substrate, which permits large area application.
منابع مشابه
Wearable red–green–blue quantum dot light-emitting diode array using high-resolution intaglio transfer printing
Deformable full-colour light-emitting diodes with ultrafine pixels are essential for wearable electronics, which requires the conformal integration on curvilinear surface as well as retina-like high-definition displays. However, there are remaining challenges in terms of polychromatic configuration, electroluminescence efficiency and/or multidirectional deformability. Here we present ultra-thin...
متن کاملThin-film Encapsulation of Organic Light-Emitting Diodes Using Single and Multilayer Structures of MgF2, YF3 and ZnS
In this research, the lifetime of green organic light emitting diodes (OLEDs) is studied using four passivation layers. To encapsulate the OLEDs, MgF2, YF3, composed of alternating MgF2/ZnS and YF3/ZnS layers were grown by thermal vacuum deposition. Measurements show that the device lifetime is significantly improved by using YF3 and ZnS as passivation layers. However, diodes encapsulated by Mg...
متن کاملHigh-resolution electrohydrodynamic jet printing of small-molecule organic light-emitting diodes.
The development of alternative organic light-emitting diode (OLED) fabrication technologies for high-definition and low-cost displays is an important research topic as conventional fine metal mask-assisted vacuum evaporation has reached its limit to reduce pixel sizes and manufacturing costs. Here, we report an electrohydrodynamic jet (e-jet) printing method to fabricate small-molecule OLED pix...
متن کاملFlexible display enabling technology
In a collaboration between Pennsylvania State University and Princeton University, we have been laying the foundations for flexible display technology. Flexible substrates including plastic or steel foil, backplanes of organic or silicon transistors, and directly printed RGB organic light emitting diodes are issues central to this collaboration. We present an overview of key recent results. Sil...
متن کاملCathodic and Anodic Material Diffusion in Polymer/Semiconductor- Nanocrystal Composite Devices
In the present day, the information technologies and telecommunications sector continually increase their demand for low cost, low power consumption, high performance electroluminescent devices for display applications. Furthermore, general lighting applications, such as white light and large array colour displays, would also benefit from an increase in the overall efficiency. Several technolog...
متن کامل