Numerical analysis of thermal stress and shrinkage of wax patterns. III. Effects of physical properties and cooling conditions.
نویسندگان
چکیده
Thermal stresses in three brands of inlay waxes were numerically analyzed under different cooling conditions using the rheological and thermal properties of waxes. On the basis of this analysis , the shrinkage of the wax pattern was calculated. The larger the stress relaxation of the wax and the higher the ambient temperature, the smaller the thermal stress induced in the wax. The shrinkage of the wax pattern that was restrained by the die was extremely smaller than that of the male portion of the pattern . This indicates that the stress relaxation of the wax contributed greatly to the restriction of shrinkage of the wax pattern at the male portion of the die.
منابع مشابه
Evaluation of Heterogeneous Densification, Anisotropic Shrinkage and Rheological Behavior of Ceramic Materials during Liquid Phase Sintering by Numerical-Experimental Procedure
The effective shear and bulk viscosity, as well as dynamic viscosity, describe the rheological properties of the ceramic body during the liquid phase sintering process. The rheological parameters depend on the physical and thermo-mechanical characteristics of the material such as relative density, temperature, grain size, diffusion coefficient, and activation energy. Thermal behavior of the cer...
متن کاملSimulation Shrinkage and Stress Generated During Convective Drying of Carrot Slices
The moist sample shrinks during drying and the non-uniformity shrinkage involves stresses in the body. The aim of the present work is simulating deformations and drying-induced stresses of carrot slice during a convective drying. The effect of shrinkage on the heat and mass transfer profiles were considered. Non-constant physical and thermal properties were also incorporated in the model and th...
متن کاملSimulation Shrinkage and Stress Generated During Convective Drying of Carrot Slices
The moist sample shrinks during drying and the non-uniformity shrinkage involves stresses in the body. The aim of the present work is simulating deformations and drying-induced stresses of carrot slice during a convective drying. The effect of shrinkage on the heat and mass transfer profiles were considered. Non-constant physical and thermal properties were also incorporated in the model and th...
متن کاملThe effect of injection parameters on dimensional accuracy of wax patterns for investment casting
Thermal expansion and hot deformation are two phenomena causing dimensional errors in investment casting. This error occurs in dimensions between the die and wax pattern. Therefore, the wax's thermo-physical and thermo-mechanical properties, the metal die features, and the process parameters affect the dimensions of the wax pattern. Some important effective process parameters are the injection ...
متن کاملExperimental and Numerical Investigations on Al2O3–Tricosane Based Heat Pipe Thermal Energy Storage
The enhancement of operating life cycle of electronic devices necessitates the development of efficient cooling techniques. Therefore, in the present work the effects of employment of Phase Change Material, in the adiabatic section of heat pipe for electronic cooling applications were experimentally and numerically investigated. Tricosane (100 ml) is chosen as PCM in this study, where Al2O3 nan...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Dental materials journal
دوره 3 2 شماره
صفحات -
تاریخ انتشار 1984