A 1.5-V, 2.4GHz CMOS Low-Noise Amplifier
نویسندگان
چکیده
A 2.4GHz low noise amplifier has been designed in a standard CMOS 0.35 urn process. The transistor model is Bsim3 for 0.35um process. The amplifier provides a forward gain of 33dB with a noise figure only 0.92dB while drawing 17mw from a 1.5 V supply. Design simulation results are presented in this paper.
منابع مشابه
A 2.4GHz Cascode CMOS Low Noise Amplifier
A cascode CMOS low noise amplifier (LNA) is presented along with the used design methodology and measurement results. The LNA works at 2.4 GHz with 14.5 dB voltage gain and 2.8 dB simulated noise figure (NF). Powered from a 1.8 V supply, the core measured current consumption is 2.76 mA. An output buffer was designed to match a 50 Ω load and its current consumption is 5.5 mA. The technology used...
متن کاملA High Linear And Low Noise CMOS RF Front-End For 2.4GHz ZigBee Applications
A 2.4 GHz CMOS RF front-end using for ZigBee application is described. The front-end consists of a low noise amplifier and a down-mixer and uses a 2 MHz IF frequency. A common source with resistive feedback and an inductive degeneration are adopted for a low noise amplifier, and a 20 dB gain control step is digitally controlled. A passive mixer for low current consumption is employed. The RF fr...
متن کاملA High Gain and Forward Body Biastwo-stage Ultra-wideband Low Noise Amplifier with Inductive Feedback in 180 nm CMOS Process
This paper presents a two-stage low-noise ultra-wideband amplifier to obtain high and smooth gain in 180nm CMOS Technology. The proposed structure has two common source stages with inductive feedback. First stage is designed about 3GHz frequency and second stage is designed about 8GHz. In simulation, symmetric inductors of TSMC 0.18um CMOS technology in ADS software is used.Simulations results ...
متن کاملA W-band Simultaneously Matched Power and Noise Low Noise Amplifier Using CMOS 0.13µm
A complete procedure for the design of W-band low noise amplifier in MMIC technology is presented. The design is based on a simultaneously power and noise matched technique. For implementing the method, scalable bilateral transistor model parameters should be first extracted. The model is also used for transmission line utilized in the amplifier circuit. In the presented method, input/output ma...
متن کاملA CMOS Multi-band Low Noise Amplifier Using High-Q Active Inductors
In this paper, a CMOS Multi-band LNA using High-Q active inductors load with a binary code band selector suitable for multi-standards wireless applications is proposed. Using an improved high-Q active inductor including two bits binary controlled code, the multi-band low noise amplifier operating at four different frequency bands is realized. The proposed amplifier is designed in TSMC 0.18-um C...
متن کامل