Oxidation resistance of plasma coated and laser treated mild steel
نویسندگان
چکیده
Stainless steel powder was coated on mild steel substrate using plasma coating. The porous coating thus obtained was modified using laser irradiation. The oxidation behaviour of the plasma coated as well as laser treated material was studied in air at 1073 K. There was considerable decrease in oxidation rate of mild steel after plasma coating as expected. In addition the oxidation resistance improved significantly after laser treatment. Various laser parameters influence the coating characteristics. Their effect on coating composition and on oxidation rate is discussed.
منابع مشابه
Characterization of Oxide Film Formed on Ck45 Steel by Plasma Electrolytic Oxidation Method
Plasma electrolytic oxidation (PEO) is the new, environmentally and cost-effective method for coating the metals. This method vastly has been studied for coating Aluminum, Titanium and Magnesium and their alloys and recently for steel. In present study, Ck45 steel samples were coated by PEO method in order to improve corrosion resistance. During this process specimens were immerged in carbonate...
متن کاملIsothermal and cyclic oxidation behavior of AISI 430 ferritic stainless steel coated with titanium
In order to improve the oxidation resistance of ferritic stainless steel, it is possible to deposit a protective coating on steel substrate. In this research through the usage of pack cementation method a coating of titanium was applied on the surface of AISI 430 stainless steel. Scanning Electron-Microscopy (SEM), Energy- Dispersive X-ray spectrometry (EDAX) and X-ray diffraction (XRD) were us...
متن کاملInvestigation of the oxidation behavior of Mn-coated AISI 441 steel for SOFCs interconnect application
Protective coatings that resist oxide scale growth and decrease chromium evaporation are necessary to makestainless steel interconnect materials for long-term durable operation of solid oxide fuel cells (SOFCs). Inthis study a layer of manganese was coated on the surface of AISI 441 ferritic stainless steel which is used insolid oxide fuel cells for interconnect applications. The oxidation beha...
متن کاملInvestigation on the Microstructure, Oxidation and Electrical Behavior of Ti-coated Crofer 22APU Steel for SOFC Interconnect Applications
One of the most effective ways to improve oxidation resistance of interconnects used in solid oxide fuel cells (SOFCs) is to apply a layer of conductive protective coating. In this study, Crofer 22APU ferritic steel was coated in a titanium- based powder mixture by pack cementation method. The powder composition for titanium coating was Ti 20 wt.%, NH4Cl 5 wt.% (activator) and Al2O3 75 wt.%. Th...
متن کاملبررسی خواص فولاد زنگنزن کروفر تولید شده بهروش آلیاژسازی مکانیکی برای استفاده در صفحات اتصالدهنده پیلهای سوختی اکسید جامد
This study has examined the properties of Crofer 22APU stainless steel produced by mechanical alloying for using as interconnect plates in solid oxide fuel cells.This alloy was produced by mixing the source powders and mechanical alloying for 40 hours. For creating a sample with high density, spark-plasma sintering was applied at 1100 °C and 50 Mpa stress for 10 minutes. To achieve the des...
متن کامل