Ultrasonic technique for imaging tissue vibrations: preliminary results.

نویسندگان

  • Siddhartha Sikdar
  • Kirk W Beach
  • Shahram Vaezy
  • Yongmin Kim
چکیده

We propose an ultrasound (US)-based technique for imaging vibrations in the blood vessel walls and surrounding tissue caused by eddies produced during flow through narrowed or punctured arteries. Our approach is to utilize the clutter signal, normally suppressed in conventional color flow imaging, to detect and characterize local tissue vibrations. We demonstrate the feasibility of visualizing the origin and extent of vibrations relative to the underlying anatomy and blood flow in real-time and their quantitative assessment, including measurements of the amplitude, frequency and spatial distribution. We present two signal-processing algorithms, one based on phase decomposition and the other based on spectral estimation using eigen decomposition for isolating vibrations from clutter, blood flow and noise using an ensemble of US echoes. In simulation studies, the computationally efficient phase-decomposition method achieved 96% sensitivity and 98% specificity for vibration detection and was robust to broadband vibrations. Somewhat higher sensitivity (98%) and specificity (99%) could be achieved using the more computationally intensive eigen decomposition-based algorithm. Vibration amplitudes as low as 1 mum were measured accurately in phantom experiments. Real-time tissue vibration imaging at typical color-flow frame rates was implemented on a software-programmable US system. Vibrations were studied in vivo in a stenosed femoral bypass vein graft in a human subject and in a punctured femoral artery and incised spleen in an animal model.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Transcutaneous Localization of Arterial Bleeding by Two-Dimensional Ultrasonic Imaging of Tissue Vibrations

Arterial bleeding into a free space is known to cause local vibrations in tissue. To study the effectiveness of utilizing these tissue vibrations in localizing the site of arterial bleeding, we have developed an algorithm for ultrasonically imaging these tissue vibrations. Simulation results indicate that our algorithm can correctly detect vibrations in the presence of pulsatile wall motion, bl...

متن کامل

Phased array ultrasonic imaging using an improved beamforming based total focusing method for non destructive test

One of the novel ultrasonic phased array based scanning methods for ultrasonic imaging in non-destructive test is total focusing method (TFM). This method employs maximum available information of the phased array elements and leads to an improved defect detection accuracy compared to conventional scanning methods. Despite its high detection accuracy, TFM behaves weak in distinguishing the real ...

متن کامل

Phased array ultrasonic imaging using an improved beamforming based total focusing method for non destructive test

One of the novel ultrasonic phased array based scanning methods for ultrasonic imaging in non-destructive test is total focusing method (TFM). This method employs maximum available information of the phased array elements and leads to an improved defect detection accuracy compared to conventional scanning methods. Despite its high detection accuracy, TFM behaves weak in distinguishing the real ...

متن کامل

Comparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes

In this investigation, the material removal rate, tool wear rate and surface integrity obtained by EDM, ultrasonic vibrations assisted EDM and magnetic field assisted EDM were studied and compared with together to show the quality of the effects of applying each of ultrasonic vibrations to tool and magnetic field around gap distance of EDM process on material removal rate, tool wear rate, and s...

متن کامل

Influence of ultrasonic vibration on micro-extrusion.

Micro-forming is a miniaturization technology with great potential for high productivity. Some technical challenges, however, need to be addressed before micro-forming becomes a commercially viable manufacturing process. These challenges include severe tribological conditions, difficulty in achieving desired tolerances, and short tool-life due to inability of available die materials to withstan...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Ultrasound in medicine & biology

دوره 31 2  شماره 

صفحات  -

تاریخ انتشار 2005