Identification of contaminant sources in enclosed spaces by a single sensor.

نویسندگان

  • T Zhang
  • Q Chen
چکیده

UNLABELLED To protect occupants from infectious diseases or possible chemical/biological agents released by a terrorist in an enclosed space, such as an airliner cabin, it is critical to identify gaseous contaminant source locations and strengths. This paper identified the source locations and strengths by solving inverse contaminant transport with the quasi-reversibility (QR) and pseudo-reversibility (PR) methods. The QR method replaces the second-order diffusion term in the contaminant transport equation with a fourth-order stabilization term. By using the airflow pattern calculated by computational fluid dynamics (CFD) and the time when the peak contaminant concentration was measured by a sensor in downstream, the QR method solves the backward probability density function (PDF) of contaminant source location. The PR method reverses the airflow calculated by CFD and solves the PDF in the same manner as the QR method. The position with the highest PDF is the location of the contaminant source. The source strength can be further determined by scaling the nominal contaminant concentration computed by CFD with the concentration measured by the sensor. By using a two-dimensional and a three-dimensional aircraft cabin as examples of enclosed spaces, the two methods can identify contaminant source locations and strengths in the cabins if the sensors are placed in the downstream location of the sources. The QR method performed slightly better than the PR method but with a longer computing time. PRACTICAL IMPLICATIONS The paper presents a method that can be used to find a gaseous contaminant source location and determine its strength in enclosed spaces with the data of contaminant concentration measured by one sensor. The method can be a very useful tool to find where, what, and how the contamination has happened. The method is also useful for optimally placing sensors in enclosed spaces. The results can be applied to develop appropriate measures to protect occupants in enclosed environments from infectious diseases or chemical/biological warfare agents released by a terrorist.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Identification of contaminant sources in enclosed environments by inverse CFD modeling.

UNLABELLED In case contaminants are found in enclosed environments such as aircraft cabins or buildings, it is useful to find the contaminant sources. One method to locate contaminant sources is by inverse computational fluid dynamics (CFD) modeling. As the inverse CFD modeling is ill posed, this paper has proposed to solve a quasi-reversibility (QR) equation for contaminant transport. The equa...

متن کامل

Heavy metal pollution and identification of their sources in soil over Sangan iron-mining region, NE Iran

The aim of this study was to determine the extent of metal pollutions and the identification of their major sources in the vicinity of the Sangan iron mine occurring in NE Iran. Soil samples were collected from the vicinity of the mine site and analyzed for heavy metals. In addition, the chemical speciation of these metals was investigated by means of the sequential extraction procedure. The st...

متن کامل

Sensor Location Design for Contaminant Source Identification in Water Distribution Systems

A general method is proposed to identify appropriate network locations for placing water quality monitoring sensors to identify the sources of accidental or deliberate contaminations. First, the contamination source identification problem is discussed for an assigned set of monitored locations. If the contaminant is conservative or its reaction rate in water is first order, the problem can be e...

متن کامل

Detection of Fuel Adulteration in Real Time Using Optical Fiber Sensor and Peripheral Interface Controller

Detection of fuel adulteration in real time is the most important need of the world as it generates the hazardous effects on the environment, living and nonliving things. Various automotive users and fuel providers may mix kerosene in petrol and diesel. Adulterated fuel increases air pollution, as well as reduces the performance of vehicle engines. Such a malpractice in fuel is prevailing becau...

متن کامل

Probabilistic Contaminant Source Identification in Water Distribution Infrastructure Systems

Large water distribution systems can be highly vulnerable to penetration of contaminant factors caused by different means including deliberate contamination injections. As contaminants quickly spread into a water distribution network, rapid characterization of the pollution source has a high measure of importance for early warning assessment and disaster management. In this paper, a methodology...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Indoor air

دوره 17 6  شماره 

صفحات  -

تاریخ انتشار 2007