Hot Plasticity of Alpha Beta Alloys
نویسندگان
چکیده
منابع مشابه
The Role of Adrenergic Receptors on Neural Excitability and Synaptic Plasticity: A Narrative Review
Adrenergic receptors have an important role in neural excitability and synaptic plasticity. Despite a lot of studies on these receptors, their exact role in brain disorders accompanied with hyperexcitability has not been determined. There are also controversies on their role in synaptic plasticity. In this review article, the important studies done in this regard have been reviewed to achieve a...
متن کاملHot deformation studies on discontinuously reinforced Ti-Alloys
Titanium alloys exhibit high specific strength and stiffness that fit structural applications demanding lightweight. The microstructure of the alpha-beta titanium alloys can be changed by thermomechanical processes such as heat treatments and pre-forging to achieve a certain ductility. Ceramic reinforcements can improve specific strength and stiffness, and also the wear resistance. In Situ part...
متن کاملCalculation of recovery plasticity in multistage hot forging under isothermal conditions
A widely used method for hot forming steels and alloys, especially heavy forging, is the process of multistage forging with pauses between stages. The well-known effect which accompanies multistage hot forging is metal plasticity recovery in comparison with monotonic deformation. A method which takes into consideration the recovery of plasticity in pauses between hot deformations of a billet un...
متن کاملArgon-shielded hot pressing of titanium alloy (Ti6Al4V) powders.
The paper presents the method of the argon - shielded hot pressing of titanium alloy (Ti6A14V) powder (used in medical industry). The powders produced in the GA (gas atomization) process and in the HDH (hydride - dehydride) process were used in the experiments. A pressing process was conducted at a temperature of 800-850 degrees C for different lengths of time. An unoxidized sintered material, ...
متن کاملHot Press Forging as the Direct Recycling Technique of Aluminium – a Review
Aluminium is totally recyclable with no downgrading of its qualities, but in the process of typical conventional aluminium recycling, there are quite a number of negative impacts. The recycling of aluminium and its alloys by direct recycling method is relatively simple, consumes small amount of energy, produce small amount of waste and does not have a harmful effect on the environment. This app...
متن کامل