The Effect of Styrene-Butadiene-Rubber (SBR) Polymer Modifier on Properties of Bitumen
نویسنده
چکیده
Abstract—In order to use bitumen in hot mix asphalt, it must have specific characteristics. There are some methods to reach these properties. Using polymer modifiers are one of the methods to modify the bitumen properties. In this paper the effect of StyreneButadiene-Rubber that is one of the bitumen polymer modifiers on rheology properties of bitumen is studied. In this regard, the rheological properties of base bitumen and the modified bitumen with 3, 4, and 5 percent of Styrene-Butadiene-Rubber (SBR) were analysed. The results show that bitumen modified with 5 percent of SBR has the best performance than the other samples.
منابع مشابه
Engineering Properties of SMA Mixtures/Polymer/RGP Blends
In this research, the efficiency of Recycled Glass Powder (RGP) is evaluated for improvement of polymer-modified bitumen and asphalt mixture performance. An extensive laboratory programm was undertaken for polymer-modified bitumen including Crumb Rubber (CR), Styrene Butadiene Styrene (SBS) and Styrene Butadiene Rubber (SBR). Rheological and mechanical proper...
متن کاملLaboratory Studies of the Effect of Recycled Glass Powder Additive on the Properties of Polymer Modified Asphalt Binders
In this paper, the effect of adding recycled glass powder (RGP) as a third component in polymer modified bitumen is studied. RGP and styrene butadiene rubber (SBR) is added to the base bitumen in order to prepare modified binders and mixtures. The initial study is performed to determine physical properties of unmodified, SBR modified and RGP-SBR modified asphalt binders which prove RGP's compat...
متن کاملRheological properties of modified Bitumen: Comparison of waste polymers’ performance
In this investigation, rheological properties of three different polymer-modified bitumen compounds containing recycled polyethylene terephthalate (R-PET), crumb rubber (CR) and poly (styrene-butadiene-styrene) (SBS) are evaluated and compared. The modified samples were tested by a dynamic shear rheometer (DSR) where complex modulus (G*), phase angle (δ) and rutting resistance (G*/Sinδ) of spec...
متن کاملEffect of carbon black and fly ash co-fillers content on mechanical and thermal behaviors of styrene butadiene rubber compounds
Fly ash (FA) is produced as a waste byproduct during the burning process of coal in thermal power plants whose cost is primarily associated to cleaning and transportation. It possesses mechanical properties on account of its constituents like silica and alumina. The use of FA as filler in styrene butadiene rubber (SBR) was of researchers’ interest to reinforce and/or to reduce product cost. In ...
متن کاملAnalysis of the Modifying Effect of Styrene Butadiene Rubber Latex Copolymer on Strength and Permeability Properties of Structural Light Aggregate Concrete
Polymers not only possess repairing functions concerning the concrete structures, but also due to their properties are used in making different types of polymer cements and improving the matrix structure of cement materials, enhancing the viscosity, mechanical, and stability power of concretes. Today, there is limited knowledge on the use of SBR in structural light aggregate concrete. In the pr...
متن کامل