Iterative Feedback Tuning of Cross-Directional Processes Controller
نویسندگان
چکیده
This paper studies the possible application of Iterative Feedback Tuning (IFT) to the paper machine cross-directional (CD) control. Although the CD control is naturally a multiinput-multi-output (MIMO) problem, by enforcing the circulant assumption, IFT for CD control is as simple as the single-input-single-output (SISO) case, i.e. only one gradient experiment is needed for estimating the gradient. Simulation of a simple disturbance rejection problem is included to demonstrate the main ideas.
منابع مشابه
Iterative Controller Tuning for Processes with Fold Bifurcations
Processes involving fold bifurcation are notoriously difficult to control in the vicinity of the fold where most often optimal productivity is achieved . In cases with limited process insight a model based control synthesis is not possible. This paper uses a data driven approach with an improved version of iterative feedback tuning to optimizing a closed loop performance criterion, as a systema...
متن کاملA Unified IMC based PI/PID Controller Tuning Approach for Time Delay Processes
This paper proposes a new PI/PID controller tuning method within filtered Smith predictor (FSP) configuration in order to deal with various types of time delay processes including stable, unstable and integrating delay dominant and slow dynamic processes. The proposed PI/PID controller is designed based on the IMC principle and is tuned using a new constraint and without requiring any approxima...
متن کاملFeedback controller design for a spatially distributed system: the paper machine problem
— This article reports on the development and implementation of an algorithm for the design of spatially-distributed feedback controllers for the wide variety of physical processes that are included in cross-directional control of industrial paper machines. The spatial and temporal structure of this class of process models is exploited in the use of the two-dimensional frequency domain for anal...
متن کاملIterative Feedback Tuning Applied to Power Plant Control
One of the most recent methods for controller tuning and optimization is Iterative Feedback Tuning (IFT). It is capable to optimize parameters of linear digital singleinput, single-output controller of general structure (P, PI, PD, PID, transfer function) in closed loop. A software tool applying the IFT method has been developed in Matlab environment. This tool was validated on several examples...
متن کاملAn ANOVA Based Analytical Dynamic Matrix Controller Tuning Procedure for FOPDT Models
Dynamic Matrix Control (DMC) is a widely used model predictive controller (MPC) in industrial plants. The successful implementation of DMC in practical applications requires a proper tuning of the controller. The available tuning procedures are mainly based on experience and empirical results. This paper develops an analytical tool for DMC tuning. It is based on the application of Analysis of V...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008