FPGA Implementation of ADPLL with Ripple Reduction Techniques
نویسندگان
چکیده
In this paper FPGA implementation of ADPLL using Verilog is presented. ADPLL with ripple reduction techniques is also simulated and implemented on FPGA. For simulation ISE Xilinx 10.1 CAD is used.Vertex5 FPGA (Field Programmable Gate Array) is used for implementation. ADPLL performance improvement, while using ripple reduction techniques is also discussed. The ADPLL is designed at the central frequency of 100 kHz. The frequency range of ADPLL is 0 kHz to 199 kHz. But when it is implemented with ripple reduction techniques, the frequency range observed is from 11 kHz to 216 kHz.
منابع مشابه
A Method of Sky Ripple Residual Nonuniformity Reduction for a Cooled Infrared Imager and Hardware Implementation
Cooled infrared detector arrays always suffer from undesired ripple residual nonuniformity (RNU) in sky scene observations. The ripple residual nonuniformity seriously affects the imaging quality, especially for small target detection. It is difficult to eliminate it using the calibration-based techniques and the current scene-based nonuniformity algorithms. In this paper, we present a modified...
متن کاملGeneration of Three-Phase PWM Inverter using Xilinx FPGA and its Application for Utility Connected PV System (RESEARCH NOTE)
Analysis and practical implementation of the regular symmetric sampled three-phase PWM inverter waveform has been presented in this paper. It is digitally implemented on a Xilinx field programmable gate array FPGA, and the essential considerations involved in the feasibility of using a Xilinx XC4008E software-based to generate PWM has been discussed. All the necessary Xilinx hardware/software t...
متن کاملThrust Ripple Reduction of Permanent Magnet Linear Synchronous Motor Based on Improved Pole Shape for Electromagnetic Launcher System
In this paper, a new design of permanent magnet linear synchronous motor (PMLSM) for electromagnetic launcher system (EMLs) has been investigated in terms of the requisite amount of average launching thrust force and thrust force ripple minimization through finite element method. EMLs are a kind of technology used to develop thrust force and launch heavy loads with different applications includ...
متن کاملFPGA Implementation of JPEG and JPEG2000-Based Dynamic Partial Reconfiguration on SOC for Remote Sensing Satellite On-Board Processing
This paper presents the design procedure and implementation results of a proposed hardware which performs different satellite Image compressions using FPGA Xilinx board. First, the method is described and then VHDL code is written and synthesized by ISE software of Xilinx Company. The results show that it is easy and useful to design, develop and implement the hardware image compressor using ne...
متن کاملImplementation and Performance Evaluation of Prefix Adders uing FPGAs
Parallel Prefix Adders have been established as the most efficient circuits for binary addition. The binary adder is the critical element in most digital circuit designs including digital signal processors and microprocessor data path units. The final carry is generated ahead to the generation of the sum which leads extensive research focused on reduction in circuit complexity and power consump...
متن کامل