Time - Delay LPV System Control and Its Application in Chatter Suppression of the Milling Process
نویسندگان
چکیده
This paper proposed a methodology for the control of model following control system (MFCS) approach to time-delay linear parameter-varying (LPV) system. The method incorporates a state control law which makes the output error zero, the bounded property of the internal states for the control is given, and the utility of this control design is guaranteed. Numerical example is given to demonstrate the effectiveness and less conservativeness of the proposed methods. The proposed control methodology is demonstrated on chatter suppression in the milling process.
منابع مشابه
Experimental investigation of the gyroscopic and rotary inertia effects on the chatter boundary in a milling process
Experimental examination of the gyroscopic and rotary inertia effects on the chatter boundary in a milling operation is the chief aim of this article. The equations of motion of the tool vibration are derived based on Timoshenko beam theory and Hamilton principle by considering gyroscopic moment, rotary inertia, velocity-dependent process damping and radial immersion effect. For a range of dept...
متن کاملEmotional Learning Based Intelligent Controller for MIMO Peripheral Milling Process
During the milling process, one of the most important factors in reducing tool life expectancy and quality of workpiece is the chattering phenomenon due to self-excitation. The milling process is considered as a MIMO strongly coupled nonlinear plant with time delay terms in cutting forces. We stabilize the plant using two independent Emotional Learning-based Intelligent Controller (ELIC) in par...
متن کاملExperimental Passive Suppression of the Regenerative Chatter Phenomenon by Variation of the Frequency and Amplitude of the Spindle Motor Excitation in Turning
The suppression of the regenerative chatter phenomenon in turning process via the variation of the frequency and amplitude of the spindle motor excitation is carried out in this research. A programmable inverter is employed for variable periodic excitation of the spindle motor. A set of turning experiments is designed and performed on a number of conical work pieces both in constant spindle spe...
متن کاملExperimental Passive Suppression of the Regenerative Chatter Phenomenon by Variation of the Frequency and Amplitude of the Spindle Motor Excitation in Turning
The suppression of the regenerative chatter phenomenon in turning process via the variation of the frequency and amplitude of the spindle motor excitation is carried out in this research. A programmable inverter is employed for variable periodic excitation of the spindle motor. A set of turning experiments is designed and performed on a number of conical work pieces both in constant spindle spe...
متن کاملEffects of Helix Angle Variations on Stability of Low Immersion Milling
The stability behavior of low immersion helical end milling processes is investigated in this paper. Low radial immersion milling operations involve interrupted cutting which induces chatter vibration under certain cutting conditions. Time Finite Element Analysis (TFEA) is suggested for an approximate solution for delayed differential equations encountered during interrupted milling. An improve...
متن کامل