Modeling and Simulation of Blast Wave for Pressure Sensor Design
نویسندگان
چکیده
In this paper a universal model for pressure waves generated by high energy charge explosives and gunshots is developed for determining the pressure vs. time profile (P-T curve) at a given point in space which is useful for design and characterization of pressure micro sensors and explosives etc. The simulation of the model is carried out through virtual instrumentation (VI) using LabVIEW. The technique used to develop the model, in the present work, is similar to the well known statistical technique of structural equation modeling (SEM).The simulated data is compared with the available experimental data sets in terms of Pearson’s correlation and chisquared goodness-of-fit test (χ 2 ) and they were found to be in close matching. This work can be extended for modeling and characterization of other types of pressure waves.
منابع مشابه
TiO2 based surface acoustic wave gas sensor with modified electrode dimensions for enhanced H2 sensing application
The design and optimization of nanostructure-based surface acoustic wave (SAW) gas sensor is analyzed based on TiO2 sensing layer and modified electrode dimensions. The sensitivity of the gas sensor depends upon the type of sensing layer used and active surface area obtained by varying the aspect ratio. The performance of the sensor is observed from 0.1ppm to 100ppm concentration of ...
متن کاملDesign and Modeling of a New Type of Tactile Sensor Based on the Deformation of an Elastic Membrane
This paper presents the design and modeling of a flexible tactile sensor, capable of detecting the 2D surface texture image, contact-force estimation and stiffness of the sensed object. The sensor is made of polymer materials. It consists of a cylindrical chamber for pneumatic actuation and a membrane with a mesa structure. The inner radius of the cylindrical chamber is 2cm and its outer radius...
متن کاملتأثیر مدلسازی تراک1 در محاسبه خواص موج بلاست ناشی از انفجار ابر هوا- سوخت
In this work the effect of the accuracy of a FAE detonation modeling on the generated blast wave is investigated. First, a one-dimensional numerical simulation with a reduced chemical kinetics of C2H2-O2-Ar, involving 25 elementary reactions, is used as the base model. The properties of the blast calculated with this model is compared with those of simpler models, the similarity solution of Tay...
متن کاملSimulation and Modeling of a High Sensitivity Micro-electro-mechanical Systems Capacitive Pressure Sensor with Small Size and Clamped Square Diaphragm
This paper proposes a Micro-electro-mechanical (MEMS) capacitive pressure sensor that relies on the movable electrode displaced like a flat plate equal to the maximum center deflection of diaphragm. The diaphragm, movable electrode and mechanical coupling are made of polysilicon, gold and Si3N4, respectively. The fixed electrode is gold and the substrate is Pyrex glass. This proposed method inc...
متن کاملModeling of capacitance and sensitivity of a MEMS pressure sensor
In this paper modeling of capacitance and sensitivity for MEMS capacitive pressure sensor is presented. In capacitive sensor the sensitivity is proportional to deflection and capacitance changes versus pressure. Therefore first the diaphragm displacement, capacitance and sensitivity of sensor with square diaphragm have been modeled and then simulated using finite element method (FEM). It can b...
متن کاملDesign, Modeling, and Construction of a New Tactile Sensor for Measuring Contact-Force
This paper presents the design, modeling, and testing of a flexible tactile sensor and its applications. This sensor is made of polymer materials and can detect the 2D surface texture image and contact-force estimation. The sensing mechanism is based on the novel contact deflection effect of a membrane. We measure the deflection of the membrane with measuring the strain in the membrane with emb...
متن کامل