Effects of box size, frequency of lifting, and height of lift on maximum acceptable weight of lift and heart rate for male university students in Iran
نویسندگان
چکیده
INTRODUCTION In spite of the widespread use of automation in industry, manual material handling (MMH) is still performed in many occupational settings. The emphasis on ergonomics in MMH tasks is due to the potential risks of workplace accidents and injuries. This study aimed to assess the effect of box size, frequency of lift, and height of lift on maximum acceptable weight of lift (MAWL) on the heart rates of male university students in Iran. METHODS This experimental study was conducted in 2015 with 15 male students recruited from Tehran University of Medical Sciences. Each participant performed 18 different lifting tasks that involved three lifting frequencies (1lift/min, 4.3 lifts/min and 6.67 lifts/min), three lifting heights (floor to knuckle, knuckle to shoulder, and shoulder to arm reach), and two box sizes. Each set of experiments was conducted during the 20 min work period using the free-style lifting technique. The working heart rates (WHR) were recorded for the entire duration. In this study, we used SPSS version 18 software and descriptive statistical methods, analysis of variance (ANOVA), and the t-test for data analysis. RESULTS The results of the ANOVA showed that there was a significant difference between the mean of MAWL in terms of frequencies of lifts (p = 0.02). Tukey's post hoc test indicated that there was a significant difference between the frequencies of 1 lift/minute and 6.67 lifts/minute (p = 0. 01). There was a significant difference between the mean heart rates in terms of frequencies of lifts (p = 0.006), and Tukey's post hoc test indicated a significant difference between the frequencies of 1 lift/minute and 6.67 lifts/minute (p = 0.004). But, there was no significant difference between the mean of MAWL and the mean heart rate in terms of lifting heights (p > 0.05). The results of the t-test showed that there was a significant difference between the mean of MAWL and the mean heart rate in terms of the sizes of the two boxes (p = 0.000). CONCLUSION Based on the results of this study, it was concluded that MAWL and heart rate are influenced by the variables of lifting frequency and the size of the boxes.
منابع مشابه
Determining Changes in Electromyography Indices when Measuring Maximum Acceptable Weight of Lift in Iranian Male Students
Background: In spite of the increasing degree of automation in industry, manual material handling (MMH) is still performed in many occupational settings. The aim of the current study was to determine the maximum acceptable weight of lift using psychophysical and electromyography indices.Methods: This experimental study was conducted among 15 male students recruited from Tehran University of Med...
متن کاملChanges in Back Compressive Force When Measuring Maximum Acceptable Weight of Lift in Iranian Male Students
BACKGROUND Low back pain caused by work, ranked the second after cardiovascular diseases, are among the most common reasons of patients' referral to the physicians in Iran. This study aimed to determine the changes in back compressive force when measuring maximum acceptable weight of lift in Iranian male students. METHODS This experimental study was conducted in 2015 on 15 young male students...
متن کاملSignificance of biomechanical and physiological variables during the determination of maximum acceptable weight of lift.
The aim was to identify which biomechanical and physiological variables were associated with the decision to change the weight of lift during the determination of the maximum acceptable weight of lift (MAWL) in a psychophysical study. Fifteen male college students lifted a box of unknown weight at 4.3 lifts/min, and adjusted the weight until their MAWL was reached. Variables such as heart rate,...
متن کاملAdapted Progressive Isoinertial Lifting Evaluation for determining Lifting capacity
Weight of the load and its characteristics is considered to be the important risk factor for low back disorders (LBD) among manual materials handlers. Determining weight of the load and the amount of load a person can lift is important in minimizing the incidence of LBD. Among various methods like isometric, isoinertial and isokinetic, isoinertial approach of lifting evaluation is best as it is...
متن کاملThe Effect of Back Belt on Maximum Displacement and Center of Pressure Velocity in Different Lifting Styles
Purpose: Mechanical loading is said to be an important factor in the development of low back pain (LBP). One of the main concerns in manual material handling (MMH) tasks is lifting loads, as this activity is present in most jobs. Despite the controversy about their effectiveness, belts are used in industry as either protective or assistive devices in manual load handling. The present inve...
متن کامل