Design of a Miniaturized Meandered Line Antenna for UHF RFID Tags
نویسندگان
چکیده
A semi-circle looped vertically omnidirectional radiation (VOR) patterned tag antenna for UHF (919-923 MHz for Malaysia) frequency is designed to overcome the impedance mismatch issue in this paper. Two impedance matching feeding strips are used in the antenna structure to tune the input impedance of the antenna. Two dipole shaped meandered lines are used to achieve a VOR pattern. The proposed antenna is designed for 23-j224 Ω chip impedance. The antenna is suitable for 'place and tag' application. A small size of 77.68×35.5 mm2 is achieved for a read range performance of 8.3 meters using Malaysia regulated maximum power transfer of 2.0 W effective radiated power (ERP).
منابع مشابه
Design and Fabrication of Miniaturized Fractal Antennas for Passive UHF RFID Tags
Generally, passive RFID tags consist of an integrated circuit (RFID chip) and an antenna. Because the passive tags are batteryless, the power transfer between the RFID's chip and the antenna is an important factor in the design. The increasing of the available power at the tag will increase the read range of the tag which is a key factor in RFID tags. The passive RFID tag antennas cannot be tak...
متن کاملInvestigations of Miniaturized Meander Line Tag Antenna for UHF RFID System
Nowadays, the RFID systems have been used in many applications such as logistics, supply chain, access control, product management in warehouse and many others [1]. It can use for identification with the human, animal, product and others. Moreover, it can further use with the sensor applications to detect material or other system depending on the object of applications. This paper presents the ...
متن کاملAnalysis and Design of an Uhf Rfid Metal Tag Using Magnetic Composite Material as Substrate
Using magnetic composite material as the substrate for RFID metal tag has several advantages over conventional metal tags, such as flexibility and miniaturized size. In this paper, the radiation intensity contributed by a half-wave dipole is derived based on the result of an ideal Hertzian dipole, which leads to a simple relation for thin substrate. Later on, the material constants of two mater...
متن کاملDesign of Passive UHF RFID Tag Antennas Using Metamaterial-Based Structures and Techniques
Metamaterials (Marques et al., 2008; Eleftheriades & Balmain, 2005; Herraiz-Martinez et al. 2009) are one of the many new technologies being adopted to improve the performance of radio frequency identification (RFID) systems (Finkenzeller, 2003; Stupf et al., 2007). In particular, metamaterial-based antenna designs are being used more frequently to improve the read range and reduce the size of ...
متن کاملA Broadband UHF Tag Antenna for Near-Field and Far-Field RFID Communications
The paper deals with the design of passive broadband tag antenna for Ultra-High Frequency (UHF) band. The antenna is intended for both near and far fields Radio Frequency Identification (RFID) applications. The meander dipole tag antenna geometry modification is designed for frequency bandwidth increasing. The measured bandwidth of the proposed broadband tag antenna is more than 140 MHz (820–96...
متن کامل