Auto Tuning of PID Controller for MIMO Processes
نویسنده
چکیده
One of the most basic functions of control engineers is tuning of controllers. There are always several process loops in the plant necessitate of tuning. The auto tuned Proportional Integral Derivative (PID) Controllers are designed for applications where large load changes are expected or the need for extreme accuracy and fast response time exists. The algorithm presented in this paper is used for the tuning PID controller to obtain its parameters with a minimum computing complexity. It requires continuous analysis of variation in few parameters, and let the program to do the plant test and calculate the controller parameters to adjust and optimize the variables for the best performance. The algorithm developed needs less time as compared to a normal step response test for continuous tuning of the PID through gain scheduling. Keywords—Auto tuning; gain scheduling; MIMO Processes; Optimization; PID controller; Process Control.
منابع مشابه
Offline Auto-Tuning of a PID Controller Using Extended Classifier System (XCS) Algorithm
Proportional + Integral + Derivative (PID) controllers are widely used in engineering applications such that more than half of the industrial controllers are PID controllers. There are many methods for tuning the PID parameters in the literature. In this paper an intelligent technique based on eXtended Classifier System (XCS) is presented to tune the PID controller parameters. The PID controlle...
متن کاملHybrid Fuzzy-PID Application in Boilers to Obtain Optimum Efficiency
Many real time processes have complex, uncertain and nonlinear dynamics. Boilers are nonlinear, time varying, multi-input multi-output (MIMO) systems, whose states generally vary with operating conditions. The major problem in controlling that system is that its drum water pressure and steam flow dynamics include an integrator that results a critically stable behavior. Conventional controller p...
متن کاملAuto-Tuning von PID-Mehrgrößenreglern mit Hilfe von Iterative Feedback Tuning
A new auto-tuning approach for centralized MIMO PID controllers and unknown process models is presented. Classical multivariable PID controller tuning methods are combined with iterative feedback tuning (IFT) to develop an auto-tuning method with a bounded number of tuning parameters. The method is demonstrated and validated with a steam generator example. Very good simulation results are obtai...
متن کاملA Unified IMC based PI/PID Controller Tuning Approach for Time Delay Processes
This paper proposes a new PI/PID controller tuning method within filtered Smith predictor (FSP) configuration in order to deal with various types of time delay processes including stable, unstable and integrating delay dominant and slow dynamic processes. The proposed PI/PID controller is designed based on the IMC principle and is tuned using a new constraint and without requiring any approxima...
متن کاملAuto-tuning of Pid Controllers for Mimo Processes by Relay Feedback
In this paper, the auto-tuning of decentralized PID controllers for MIMO processes using different relay feedback experiments is studied. These methods consist in identifying the ultimate point of the process, using relay feedback and applying Ziegler-Nichols-like formulae in order to tune the controllers. A benchmark illustrates the benefits and drawbacks of each approach.
متن کامل