Histological evaluation of capsules formed by silicon implants coated with polyurethane foam and with a textured surface in rats.

نویسندگان

  • Eduardo Nascimento Silva
  • Jurandir Marcondes Ribas-Filho
  • Nicolau Gregori Czeczko
  • Jan Pawel Andrade Pachnicki
  • Mário Rodrigues Montemor Netto
  • Leandro Cavalcante Lipinski
  • Lucia de Noronha
  • Joelmir Colman
  • João Otavio Zeni
  • Caroline Aragão de Carvalho
چکیده

PURPOSE: To assess the capsules formed by silicone implants coated with polyurethane foam and with a textured surface. METHODS: Sixty-four Wistar albinus rats were divided into two groups of 32 each using polyurethane foam and textured surface. The capsules around the implants were analyzed for 30, 50, 70 and 90 days. Were analyzed the following parameters: foreign body reaction, granulation tissue, presence of myofibroblasts, neoangiogenesis, presence of synovial metaplasia, capsular thickness, total area and collagen percentage of type I and III, in capsules formed around silicone implants in both groups. RESULTS: The foreign body reaction was only present in the four polyurethane subgroups. The formation of granulation tissue and the presence of myofibroblasts were higher in the four polyurethane subgroups. Regarding to neoangiogenesis and synovial metaplasia, there was no statistical difference between the groups. Polyurethane group presented (all subgroups) a greater capsule thickness, a smaller total area and collagen percentage of type I and a higher percentage area of type III, with statistical difference. CONCLUSION: The use of polyurethane-coated implants should be stimulated by the long-term results in a more stable capsule and a lower incidence of capsular contracture, despite developing a more intense and delayed inflammatory reaction in relation to implants with textured surface.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Silicone Gel Bleed on Breast Implants

Silicone is a polymer widely used for medical purposes, including breast implants. The aim of this work is to verify the occurrence of silicone gel diffusion through the lining membrane (bleed) of gel breast implants with smooth, textured, and polyurethane foam coated surfaces, sterilized by dry heat and ethylene oxide. The results enable us to conclude that there is significant difference for ...

متن کامل

Fabrication of hydroxyapatite-baghdadite nanocomposite scaffolds coated by PCL/Bioglass with polyurethane polymeric sponge technique

Objecttive (s): Silicate bioceramics like Baghdadite with chemical formula Ca3ZrSi2O9, has attracted the attention of researchers in biomedical field due to its remarkable in-vitro and in-vivo bioactivity and mechanical properties.Materials and Methods: Therefore, in the current study the baghdadite powder with Sol-Gel method was synthesized. Then, hydroxyapatite/Baghdadite (HA/Bagh) scaffolds ...

متن کامل

Polyurethane-Coated Breast Implants Revisited: A 30-Year Follow-Up

BACKGROUND Polyurethane coating of breast implants has been shown to reduce capsular contracture in short-term follow-up studies. This 30-year study is the longest examination of the use of polyurethane-coated implants and their correlation with capsular contracture. METHODS This study evaluates the senior surgeon's (F.D.P.) experience with the use of polyurethane-coated implants in aesthetic...

متن کامل

Long-term safety and efficacy of polyurethane foam-covered breast implants.

BACKGROUND Polyurethane foam-covered silicone gel-filled breast implants, introduced in the 1970s, were used in more than 110,000 American women. Because of concerns about possible toxicity, they were withdrawn from the US market in 1991. These implants remain popular in many parts of the world. OBJECTIVE The goal of this study was to evaluate long-term experience with polyurethane foam-cover...

متن کامل

Surface modification for titanium implants by hydroxyapatite nanocomposite

Background: Titanium (Ti) implants are commonly coated with hydroxyapatite (HA). However, HA has some disadvantages such as brittleness, low tensile strength and fracture toughness. It is desirable to combine the excellent mechanical properties of ZrO2 and the chemical inertness of Al2O3 with respect to the purpose of this project which was coating Ti implants with HA-ZrO2-Al2O3 to modify the s...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Acta cirurgica brasileira

دوره 31 12  شماره 

صفحات  -

تاریخ انتشار 2016